Carnegie Mellon University

Martin Cvek

Martin Cvek

Visiting Scholar

  • MI-802
Address
Carnegie Mellon University
4400 Fifth Avenue
Mellon Institute
Pittsburgh, PA 15213

Education

2018 – ongoing

Centre of Polymer Systems, Tomas Bata University in Zlin, Czech Republic

Postdoc researcher

2014 – 2018

PhD. study

Faculty of Technology, Tomas Bata University in Zlin, Czech Republic

Technology of Macromolecular Compounds – P2808/2808V006

2009 – 2014

 

BSc. and MSc. study

Faculty of Technology, Tomas Bata University in Zlin, Czech Republic

Materials Engineering – N2808/3911T011

Chemistry and Materials Technology – B2808/2808R009

Research

2022 – ongoing

Carnegie Mellon University, Department of Chemistry, USA

Supervisor: prof. Krzysztof Matyjaszewski

2020 (8 months)

Slovak Academy of Sciences, Polymer Institute, Slovakia

Supervisor: Dr. Jaroslav Mosnacek

2019 (3.5 months)

Italian Institute of Technology, Smart Materials Group, Italy

Supervisor: Dr. Athanassia Athanassiou

2018 (6 months)

University of Granada, Department of Applied Physics, Spain

Supervisor: prof. Juan de Vicente

2017 (2 months)

Johannes Kepler University Linz, Institute of Polymer Science, Austria

Supervisor: assoc. prof. Milan Kracalik

Publications

  1. MARTINEZ-CANO, O.; MORILLAS, J.R.; CVEK, M.; RAMIREZ, J.; DE VICENTE, J. High-speed videomicroscopy of shear magnetorheological fluids. Submitted manuscript.
  2. CVEK, M.; JAMATIA, T.; SULY, P.; URBANEK, M.; TORRES-MENDIETA, R. Stable magnetorheological fluids containing bidisperse fillers with compact/mesoporous silica coatings. Int. J. Mol. Sci. 2022; vol. 23, 11044.
  3. CVEK, M. Rheological models that exceed fitting capabilities of the Herschel-Bulkley model: A case study for magnetorheology. Mech. Mater. 2022; vol. 173, 104445.
  4. CVEK, M.; PAUL, U.C.; ZIA, J.; MANCINI, G.; SEDLARIK, V.; ATHANASSIOU, A. Biodegradable films of PLA/PPC and curcumin as packaging materials and smart indicators of food spoilage. ACS Appl. Mater. Interfaces 2022; vol. 14, 14654-67.
  5. GALEZIEWSKA, M.; HOLOS, A.; ILCIKOVA, M.; MRLIK, M.; OSICKA, J.; SRNEC, P.; MICUSIK, M.; MOUCKA, R.; CVEK, M.; MOSNACEK, J.; PIETRASIK, J. One-pot strategy for the preparation of electrically conductive composites using simultaneous reduction and grafting of graphene oxide via atom transfer radical polymerization. Macromolecules 2021; vol. 54, 10177–88.
  6. CVEK, M.; KOLLAR, J.; MRLIK, M.; MASAR, M.; SULY, P.; URBANEK, M.; MOSNACEK, J. Surface-initiated mechano-ATRP as a convenient tool for controlled improvement of magnetorheological suspensions. Polym. Chem. 2021; vol. 12, 5093–5105.
  7. MRLIK, M.; OSICKA, J.; CVEK, M.; ILCIKOVA, M.; SRNEC, P.; GORGOL, D.; TOFEL, P. Comparative study of PVDF sheets and their sensitivity to mechanical vibrations: The role of dimensions, molecular weight, stretching and poling. Nanomaterials 2021; vol. 11, 1637.
  8. HAVELKA, O.; CVEK, M.; URBANEK, M.; LUKOWIEC, D.; JASIKOVA, D.; KOTEK, M.; CERNIK, M.; AMENDOLA, V.; TORRES-MENDIETA, R. On the use of laser fragmentation for the synthesis of ligand-free ultra-small iron nanoparticles in various liquid environments. Nanomaterials 2021; vol. 11, 1538.
  9. PLACHY, T.; CVEK, M.; MUNSTER, L.; HANULIKOVA, B.; SULY, P.; VESEL, A.; CHENG, Q. Enhanced magnetorheological effect of suspensions based on carbonyl iron particles coated with poly(amidoamine) dendrons. Rheol. Acta 2021; vol. 60, 263–276.
  10. RONZOVA, A.; SEDLACIK, M.; CVEK, M. Magnetorheological fluids based on core-shell carbonyl iron particles modified by various organosilanes: Synthesis, stability and performance. Soft Matter 2021; vol. 17, 1229–306.
  11. GACA, M.; ILCIKOVA, M.; MRLIK, M.; CVEK, M.; VAULOT, C.; URBANEK, P.; PIETRASIK, R.; KRUPA, I.; PIETRASIK, J. Impact of ionic liquids on the processing and photo-actuation behavior of SBR composites containing graphene nanoplatelets. Sens. Actuators, B 2021; vol. 329, 129195.
  12. PEER, P.; CVEK, M.; URBANEK, M.; SEDLACIK, M. Preparation of electrospun magnetic polyvinyl butyral/Fe2O3 nanofibrous membranes for effective removal of iron ions from groundwater. J. Appl. Polym. Sci. 2020; e49576.
  13. CVEK, M.; KUTALKOVA, E.; MOUCKA, R.; URBANEK, P.; SEDLACIK, M. Lightweight, transparent piezoresistive sensors conceptualized as anisotropic magnetorheological elastomers: A durability study. Int. J. Mech. Sci. 2020; vol. 183, 105816.
  14. ZYGO, M.; MRLIK, M.; ILCIKOVA, M.; HRABALIKOVA, M.; OSICKA, J.; CVEK, M.; SEDLACIK, M.; HANULIKOVA, B.; MUNSTER, L.; SKODA, D.; URBANEK, P.; PIETRASIK, J., MOSNACEK, J. Effect of structure of polymers grafted from graphene oxide on the compatibility of particles with a silicone-based environment and the stimuli-responsive capabilities of their composites. Nanomaterials 2020; vol. 10, 591.
  15. CVEK, M.; ZAHORANOVA, A.; MRLIK, M.; SRAMKOVA, P.; MINARIK, A.; SEDLACIK, M. Poly(2-oxazoline)-based magnetic hydrogels: Synthesis, performance and cytotoxicity. Colloids Surf., B 2020; vol. 190, 110912.
  16. CVEK, M.; TORRES-MENDIETA, R.; HAVELKA, O.; URBANEK, M.; PLACHY, T.; CERNIK, M. Laser-fragmentation of carbonyl iron as a clean method to enhance magnetorheological effect. J. Cleaner Prod. 2020; vol. 254, 120182.
  17. CVEK, M.; KRACALIK, M.; SEDLACIK, M.; MRLIK, M.; SEDLARIK, V. Reprocessing of injection-molded magnetorheological elastomers based on TPE matrix. Composites, Part B 2019; vol. 179, pp. 253–61.
  18. TORRES-MENDIETA, R.; HAVELKA, O.; URBANEK, M.; CVEK, M.; WACLAWEK, S.; PADIL, V.V.T.; JASIKOVA, D.; KOTEK, M.; CERNIK, M. Laser-assisted synthesis of Fe-Cu oxide nanocrystals. Appl. Surf. Sci. 2019; vol. 469, pp. 1007–15.
  19. CVEK, M.; MRLIK, M.; SEVCIK, J.; SEDLACIK, M. Tailoring performance, damping and surface properties of magnetorheological elastomers via particle-grafting technology. Polymers 2018; vol. 10, 1411.
  20. KUTALKOVA, E.; PLACHY, T.; OSICKA, J.; CVEK, M.; MRLIK, M.; SEDLACIK, M. Electrorheological behavior of fluids containing iron(II) oxalate micro-rods. RSC Adv. 2018; vol. 8, pp. 24773–9.
  21. MOUCKA, R.; SEDLACIK, M.; CVEK, M. Dielectric properties of magnetorheological elastomers with different microstructure. Appl. Phys. Lett. 2018; vol. 112, 122901.
  22. CVEK, M.; MRLIK, M.; MOUCKA, R.; SEDLACIK, M. A systematical study of the overall influence of carbon allotrope additives on performance, stability and redispersibility of magnetorheological fluids. Colloids Surf., A 2018; vol. 543, pp. 83–92.
  23. MRLIK, M.; CVEK, M.; OSICKA, J.; MOUCKA, R.; SEDLACIK, M.; PAVLINEK, V. Surface-initiated atom transfer radical polymerization from graphene oxide: A way towards fine tuning of electrical conductivity and electro-responsive capabilities. Mater. Lett. 2018; vol. 211, pp. 138–41.
  24. CVEK, M.; MOUCKA, R.; SEDLACIK, M.; PAVLINEK, V. Electromagnetic, magnetorheological and stability properties of polysiloxane elastomers based on silane-modified carbonyl iron particles with enhanced wettability. Smart Mater. Struct. 2017; vol. 26, 105003 (10pp).
  25. CVEK, M.; MOUCKA, R.; SEDLACIK, M.; BABAYAN, V.; PAVLINEK, V. Enhancement of radio-absorbing properties and thermal conductivity of polysiloxane-based magnetorheological elastomers by the alignment of filler particles. Smart Mater. Struct. 2017; vol. 26, 095005 (7pp).
  26. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; MOSNACEK, M.; MUNSTER, L.; PAVLINEK, V. The synthesis of silicone elastomers containing silyl-based polymer-grafted carbonyl iron particles: An efficient way to improve magnetorheological, damping and sensing performances. Macromolecules 2017; vol. 50(5), pp. 2189–200.
  27. PLACHY, T.; CVEK, M.; KOZAKOVA, Z.; SEDLACIK, M.; MOUCKA, R. The enhanced MR performance of dimorphic MR suspensions containing either magnetic rods or their non-magnetic analogs. Smart Mater. Struct. 2017; vol. 26, 025026 (8pp).
  28. CVEK, M.; MRLIK, M.; PAVLINEK, V. A rheological evaluation of steady shear magnetorheological flow behavior using three-parameter viscoplastic models. J. Rheol. 2016; vol. 60(4), pp. 687–94.
  29. MRLIK, M.; ILCIKOVA, M.; CVEK, M.; PAVLINEK, V.; ZAHORANOVA, A.; KRONEKOVA, Z.; KASAK, P. Carbonyl iron coated with a sulfobetaine moiety as a biocompatible system and the magnetorheological performance of its silicone oil suspensions. RSC Adv. 2016; vol. 6(39), pp. 32823–30.
  30. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; MOSNACEK, J.; BABAYAN, V.; KUCEKOVA, Z.; HUMPOLICEK, P.; PAVLINEK, V. The chemical stability and cytotoxicity of carbonyl iron particles grafted with poly(glycidyl methacrylate) and the magnetorheological activity of their suspensions. RSC Adv. 2015; vol. 5(89), pp. 72816–24.
  31. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; PLACHY, T.; SEDLACIK, M.; MOSNACEK, J.; PAVLINEK, V. A facile controllable coating of carbonyl iron particles with poly(glycidyl methacrylate): A tool for adjusting MR response and stability properties. J. Mater. Chem. C 2015; vol. 3(18), pp. 4646–56.

Full papers in conference proceedings listed at WoS

  1. MRLIK, M.; FAJKUS, P.; GORGOL, D.; CVEK, M.; OSICKA, J. Controllable modification of the BaTiO3 nanoparticles using SI-ATRP approach and impact on the vibration sensing capabilities of their PVDF-based composites. In Nanocon 2021 – Conference Proceedings – 13h International Conference on Nanomaterials – Research and Application, p. 41–46, ISBN: 978-808836500-6.
  2. CVEK, M.; MRLIK, M.; OSICKA, J.; GORGOL, D.; TOFEL, P. PVDF/PVDF-TrFE blends loaded with BaTiO3: From processing to performance testing. In Nanocon 2021 – Conference Proceedings – 13h International Conference on Nanomaterials – Research and Application, p. 131–136, ISBN: 978-808836500-6.
  3. MRLIK, M.; CVEK, M.; OSICKA, J.; MASLOWSKI, M.; TOFEL, P. Effect of extrusion process and various elongation ratios on the structural and dielectric properties of PVDF-based copolymer containing micro and nano-sized crystallites. In Nanocon 2020 – Conference Proceedings – 12th International Conference on Nanomaterials, p. 127–132, ISBN: 978-808729498-7.
  4. CVEK, M.; OSICKA, J.; SRNEC, P.; MRLIK, M.; TOFEL, P. The effects of molecular and processing parameters on energy harvesting capability of PVDF-based nanogenerators. In Nanocon 2020 – Conference Proceedings – 12th International Conference on Nanomaterials, p. 249–254, ISBN: 978-808729498-7.
  5. MRLIK, M.; CVEK, M.; BAZANT, P.; KURITKA, I. The effect of zinc oxide filler on mechano-physical and electro-mechanical properties of PVDF. In Nanocon 2019 – Conference Proceedings – 11th International Conference on Nanomaterials, p. 124, ISBN: 978-80-87294-95-6.
  6. PEER, P.; CVEK, M.; URBANEK, M.; SEDLACIK, M. Magnetic properties of electrospun polyvinyl butyral/Fe2O3 nanofibrous membranes. In Nanocon 2019 – Conference Proceedings – 11th International Conference on Nanomaterials, p. 119, ISBN: 978-80-87294-95-6.
  7. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; MOSNACEK, J.; SEDLACIK, M. Electrorheological fluids containing graphene oxide sheets grafted with poly(methyl methacrylate). In Nanocon 2017 – Conference Proceedings – 9th International Conference on Nanomaterials, p. 87, ISBN: 978-80-87294-78-9.
  8. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; MOSNACEK, J.; KRONEK, J.; SEDLACIK, M. Grafting of magnetic particles with poly(2-isopropenyl-2-oxazoline). In Nanocon 2017 – Conference Proceedings – 9th International Conference on Nanomaterials, p. 123, ISBN: 978-80-87294-78-9.
  9. OSICKA, J.; CVEK, M.; MRLIK, M.; ILCIKOVA, M.; PAVLINEK, V.; MOSNACEK, M. Light-induced and sensing capabilities of SI-ATRP modified graphene oxide particles in elastomeric matrix. In: SPIE 10164, Active and Passive Smart Structures and Integrated Systems, 2017, 1016434.
  10. CVEK, M.; MRLIK, M.; ILCIKOVA, M.; MOSNACEK, J.; PAVLINEK, V. Preparation and characterization of graphene oxide sheets controllably grafted with PMMA brushes via surface–initiated ATRP. In Nanocon 2016 – Conference Proceedings – 8th International Conference on Nanomaterials, p. 116–21, ISBN: 978-808729471-0.
  11. MRLIK, M.; ILCIKOVA, M.; CVEK, M.; URBANEK, P.; PAVLINEK, V.; MOSNACEK, J. Controllable reduction of graphene oxide/poly(butyl acrylate) hybrids under ATRP conditions. In Nanocon 2016 – Conference Proceedings – 8th International Conference on Nanomaterials, p. 104–9, ISBN: 978-808729471-0.

Awards and fellowships

2022 – J. William Fulbright Fellowship

2020 – Award from the National Scholarship Programme of the Slovak Republic

2018 Certificate of Elsevier Reviewer Recognition – Outstanding Contribution in Reviewing

2017 Best Poster Award – International Conference on Rheology and Modelling of Materials, Miskolc, Hungary

2017 AKTION Scholarship (Czechia-Austria cooperation)

2016 First-Place Award at the Scientific conference held at the Faculty of Technology of TBU

2014 Award by Head of the Department of Physics and Materials Engineering for excellent Diploma thesis

2014 Best Poster Award – International Conference on Electrorheological Fluids and Magnetorheological Suspensions, Granada, Spain

2012 Award by the Dean of Faculty of Technology of TBU for excellent academic performance during studies

Reviewer

Ind. Eng. Chem.; J. Taiwan Inst. Chem. Eng.; J. Appl. Polym. Sci.; ACS Appl. Nano Mater.; ACS Appl. Bio Mater.; Mater. Lett.; J. Intell. Mater. Syst. Struct.; Korean J. Chem. Eng.; Polymers; Mater. Adv.; Materials; Micromachines; Mater. Chem. Phys.; ACS Appl. Mater. Interfaces