Myung S.Jhon-Chemical Engineering - Carnegie Mellon University

Myung S.Jhon

Professor, Chemical Engineering

Office: Doherty Hall 1100
Phone: 412-268-2233
Fax: 412-268-7139

Bio

Dr. Myung S. Jhon is a Professor of Chemical Engineering, a member of the Data Storage Systems Center (DSSC) and the Institute for Complex Engineered Systems at Carnegie Mellon University in Pittsburgh, PA. Professor Jhon received his B.S. in Physics from Seoul National University, Korea, and his Ph.D. in Physics from the University of Chicago. He has served as visiting professor in several institutions, including the U.S. Department of Energy (National Energy Technology Laboratory and Sandia National Laboratories); the Department of Chemical Engineering, University of California, Berkeley; IBM Almaden Research Center, San Jose; and the Naval Research Laboratory, Washington, D.C. He served as a consultant to the United Nations Industrial Development Organization, and also served as a Corporate Science and Technology Advisor for Mitsubishi Chemical Corporation (Japan) for several years.

During his leave of absence from Carnegie Mellon, Professor Jhon served as the President & CEO of Doosan DND Co., Ltd.  He also served as a World Class University Professor at Sungkyunkwan University in Korea. Professor Jhon is internationally known for his work in the fields of computational science, information storage systems, nanotechnology, organic light-emitting devices, and chemical mechanical polishing.

Professor Jhon is a Fellow of the Korean Academy of Science and Technology. He has served as an advisory committee member for a Korean national program for Tera-level nanodevices, as well as the chair of advisory board and a lead organizer of the U.S.-Korea Nanotechnology Forum. Professor Jhon is also dedicated to the educational process, as is evident from his numerous teaching awards and his role as an ABET evaluator (Akron, Worcester Polytechnic Institute, Rochester, Tufts, Stanford, Connecticut, Tennessee Tech, Stevens Institute of Technology, Maryland, and Florida), and Carnegie Institute of Technology Faculty Chair & undergraduate chair in his department. Currently, he is completing an undergraduate textbook entitled Principles of Fluid Mechanics, part of which is published on the Carnegie Mellon website.

Education

Ph.D. 1974, University of Chicago
B.A. 1967, Seoul National University

Research

Research Interests

Nanotechnology, data storage systems, computational methods (lattice-Boltzmann method, finite element method, smoothed particle hydrodynamics, Monte Carlo, atomistic, molecular dynamics & multiscale simulation, and parallel computing), polymer and suspension rheology, equilibrium and nonequilibrium statistical mechanics, tribology, interfacial dynamics, nanocomposites, fuel cells, turbulent drag reduction, graphene & semiconductors and display technology

Professor Jhon's research focuses on the fundamentals in engineering science and their application to the state-of-the-art engineering problems. He is primarily involved with the mathematical modeling of complex engineering systems using finite element, Monte Carlo, and molecular dynamics simulations. In addition, lattice Boltzmann method is currently being implemented via parallel computing schemes to examine multi-scale and multi-phenomena complex engineering systems.

He has also synthesized and characterized many different polymeric systems including polyaniline to make electrorheological (ER) fluids, consisting of a suspension of micron-sized particles in a non-conducting fluid, which plays an important role in electro-mechanical control devices. He constructed a universal scaling function for the ER & giant ER yield stresses, over a broad range of electrical field strengths, by inventing novel models. He also examined rheological properties of complex fluid systems including perfluoropolyethers, polymer/clay nanocomposites, and polymer/carbon nanotube composites.

Professor Jhon is investigating mechanical and reliability issues in information storage devices at the Data Storage Systems Center (DSSC). Mathematical software suitable for designing next-generation drives, including heat assisted magnetic recording, is being developed in collaboration with industrial partners at the DSSC. Transport processes of lubricant film in nanoscale confined geometries are being examined. Experimental and theoretical investigations in nanotribology, nanorheology, and microstructural analysis are also investigated. In conjunction with the Institute for Complex Engineered Systems (ICES), he is pioneering the modeling of nanoscale devices which is extremely important in electronics packaging area and next generation silicon-on-insulator transistors as well as the design of hydrogen fuel cells. He is also exploring the manufacturing and development of deposition equipment for organic light-emitting devices (OLEDs), which is one of the rapidly growing display technologies as well as chemical mechanical planarization (CMP) equipment, which is extensively used in semiconductor devices manufacturing industry. He has been hybridizing these technologies via virtues of nanotechnology, which will have a great impact in nanomanufacturing area.

Research Websites

Catalysis and Surface Science
Energy Science and Engineering

Highlights

  • Extensively participated in nanotechnology research, commercialization, education, and policy making. Prof. Jhon has been an advisory committee member (with M. Roco, NSF) for the National Program for Tera-level Nanodevices in Korea for the past nine years (2000 – present). He also served as the Chair of advisory board and as a lead organizer of the U.S.-Korea Nanotechnology Forum (2003 – present, (http://www.andrew.cmu.edu/org/nanotechnology-forum/). Very recently, he was edited a book with Drs. Diallo & Fromer on “Nanotechnology for Sustainable Development (Springer, 2014)” based on the content of the Eighth Forum and Resnick Institute Workshop at Caltech.
  • Served as an evaluator for the ABET Visit Team at 10 different universities since 2001.
  • Worked in the World Class Research-Oriented University (WCU) program administrated by the Ministry of Education, Science, and Technology of Korea and has been developing new courses on “holistic strategy of multi-scale simulation and system integration” as well as “special topics on nano and fusion technology.”
  • Developed new research projects via WCU program on nano-convergent technologies that are critically important to human interface systems (e.g., silicon-based flexible display, light-emitting devices, and sensors). In addition, he is involved with the policies on nanotechnologies, green energy, graphene technology and re-manufacturing areas.
  • He is planning to publish lecture notes series in chemical engineering.

Awards and Honors

  • George Tallman Ladd Award for Excellence in Research and Teaching, Carnegie Mellon University, 1981
  • William S. and Frances F. Ryan Teaching Award for Excellence in Undergraduate Teaching, Carnegie Mellon University, 1984
  • Benjamin Richard Teare Award for Excellence in Teaching at the Carnegie Institute of Technology, Carnegie Mellon University, 1984
  • Visiting Professor, Magnetics Recording Institute, IBM, San Jose, CA (Summer, 1985)
  • Senior Visiting Professor, Chemistry Division and Electronics Technology Division, Naval Research Laboratory, Washington, D.C. (Summer, 1986)
  • Expert, United Nations Industrial Development Organization (December, 1986)
  • Carnegie Institute of Technology Faculty Award, Society of Woman Engineers, 1995
  • The Marsha and Philip Dowd Fellowship, 1996
  • Foreign Member, Korean Academy of Science and Technology, 1999
  • Fellow, Korean Academy of Science and Technology, 2004
  • Kun Li Award for Excellence in Education, 1999
  • Keynote speaker, International Tribology Conference, 2000
  • International Advisory Board Member, Journal of Industrial and Engineering Chemistry, Korea, 2001
  • International Advisory Board Member, Polymer (Korea)
  • Board Member, Korean Vacuum Society
  • Keynote Speaker, Micro/Nano-COE, Nagoya University, Nagoya, Japan, March 9, 2004
  • Received WCU Distinguished Visiting Professorship from Ministry of Education, Science and Technology, Korea, 2009

Publications

Recent Publications
Selected Publications
Full Publications

Recent Publications

S.H. Vemuri, M.S. Jhon, K. Zhang, and H.J. Choi, “New analysis of yield stress on giant electrorheological fluids,” Colloid and Polymer Science 290 189-192 (2012).

S. Kim, C. Kim, Y.I. Jhon, J.K. Noh, S.H. Vemuri, R. Smith, K.Y. Chung, M.S. Jhon, and B.W. Cho, “Synthesis of layered-layered 0.5Li(2)MnO(3)center dot 0.5LiCoO(2) nanocomposite electrode materials by the mechanochemical process and first principles study,” Journal of Materials Chemistry 22 25418-25426 (2012).

S.H. Vemuri, P.S. Chung, R.L. Smith, N.E. Lee, L.T. Biegler, and M.S. Jhon, “Head-disk interface design in magnetic data storage,” Journal of Applied Physics 111 07B721 (2012).

R.L. Smith, P.S. Chung, S.H. Vemuri, G.Y Yeom, L.T. Biegler, and M.S. Jhon, “Atomistic simulation method in head-disk interface of magnetic data storage systems,” Journal of Applied Physics 111 07B717 (2012).

P.S. Chung, R. Smith, S.H. Vemuri, Y.I. Jhon, K. Tak, I. Moon, L.T. Biegler, and M.S. Jhon, “Multi-scale/multi-physical modeling in head/disk interface of magnetic data storage,” Journal of Applied Physics 111 07B712 (2012).

S. An, M.S. Jhon, C. Han, and J. Maeng, “Thrust Generation of Heaving Foil in Microflow,” AIAA Journal 50 1201-1204 (2012).

D.S. So, C.W. Kim, P.S. Chung, and M.S. Jhon, “Nanotechnology policy in Korea for sustainable growth,” Journal of Nanoparticle Research 14 854 (2012).

Y.I. Jhon, S.E. Zhu, J.H. Ahn, and M.S. Jhon, “The mechanical responses of tilted and non-tilted grain boundaries in graphene,” Carbon 50 3708-3716 (2012).

P.S. Chung, D.S. So, L.T. Biegler, and M.S. Jhon, “Nanotechnology convergence and modeling paradigm of sustainable energy system using polymer electrolyte membrane fuel cell as a benchmark example,” Journal of Nanoparticle Research 14 853 (2012).

S.H. Vemuri, P.S. Chung, R. Smith, G.Y. Yeom, Y.I. Jhon, N.E. Lee, L.T. Biegler, and M.S. Jhon, “Perfluoropolyether Lubricant Interactions With Novel Overcoat via Coarse-Grained Molecular Dynamics,” IEEE Transactions on Magnetics 48 4277-4280 (2012).

R.L. Smith, P.S. Chung, S.H. Vemuri, L.T. Biegler, and M.S. Jhon, “Atomistically Tuning Lubricant Adhesion on Carbon Overcoat Surface,” IEEE Transactions on Magnetics 48 4273-4276 (2012).

H.M. Kim, S.H. Vemuri, P.S. Chung, Y.I. Jhon, N.E. Lee, G.Y. Yeom, and M.S. Jhon, “Temperature Profile in the Presence of Hotspots in Heat Assisted Magnetic Recording,” IEEE Transactions on Magnetics 48 4265-4268 (2012).

J.K. Kim, S.W. Nam, S.I. Cho, M.S. Jhon, K.S. Min, C.K. Kim, H.B. Jung, and G.Y. Yeom, “Study on the oxidation and reduction of tungsten surface for sub-50nm patterning process,” Journal of Vacuum Science & Technology A 30 061305 (2012).

Y.I. Jhon, P.S. Chung, R. Smith, K.S. Min, G.Y. Yeom, and M.S. Jhon, “Grain boundaries orientation effects on tensile mechanics of polycrystalline graphene,” RSC Advances 3 9897-9903 (2013).

C.J. Lee, S. Lee, M.S. Jhon, and J. Shin, “Factors influencing nanotechnology commercialization: an empirical analysis of nanotechnology firms in South Korea,” Journal of Nanoparticle Research 15 1444 (2013).

J.K. Kim, S.I. Cho, N.G. Kim, M.S. Jhon, K.S. Min, C.K. Kim, and G.Y. Yeom, “Study on the Etching Characteristics of Amorphous Carbon Layer in Oxygen Plasma with Carbonyl Sulfide,” Journal of Vacuum Science & Technology A 31 021301 (2013).

J.W. Park, J.T. Lim, J.S. Oh, S.H. Kim, P.P. Viet, M.S. Jhon, and G.Y. Yeom, “Electron-injecting properties of Rb2CO3-doped Alq(3) thin films in organic light-emitting diodes,” Journal of Vacuum Science & Technology A 31 031101 (2013).

V.P. Pham, Y.W. Jo, J.S. Oh, S.M. Kim, J.W. Park, S.H. Kim, M.S. Jhon, and G.Y. Yeom, “Effect of Plasma-Nitric Acid Treatment on the Electrical Conductivity of Flexible Transparent Conductive Films,” Japanese Journal of Applied Physics 52 UNSP075102 (2013).

R.L. Smith, Y.I. Jhon, L.T. Biegler, and M.S. Jhon, “An Atomistic Study of Perfluoropolyether Lubricant Thermal Stability in Heat Assisted Magnetic Recording,” IEEE Transactions on Magnetics 49 3748-3751 (2013).

K. Zhang,Y.D. Liu, M.S. Jhon, and H.J. Choi, “Generalized Yield Stress Equation for Electrorheological Fluids,” Journal of Colloid and Interface Science 409 259-263 (2013).

M.S. Diallo, N.A. Fromer, and M.S. Jhon, “Nanotechnology for sustainable development: retrospective and outlook,” J Nanopart Res 15, 2044 (2013).

Y.I. Jhon, Y.M. Jhon, G.Y. Yeom, and M.S. Jhon, “Orientation dependence of the fracture behavior of grapheme,” Carbon 66, 619 (2014).

M.S. Diallo, N.A. Fromer, and M.S. Jhon, Nanotechnology for Sustainable Development, Springer, Berlin (2014).

H. Chen, S.H. Vemuri, P.S. Chung, and M.S. Jhon, “Buff/Wipe Effects on the Perfluoropolyether Nanoscale Thin Films,” J. Appl. Phys., May  (2014).

P.S. Chung, S.H. Vemuri, and M.S. Jhon, “Molecular rheological Analysis on Binary Blends of Perfluoropolyether Lubricants,” J. Appl. Phys., May  (2014).

S.H. Vemuri, H.M. Kim, P.S. Chung, and M.S. Jhon, “Thermal Modeling of Head Disk Interface system in Heat Assisted Magnetic Recording,” J. Appl. Phys., May  (2014).


Selected Publications

M.S. Diallo, N.A. Fromer, and M.S. Jhon, Nanotechnology for Sustainable Development, Springer, Berlin (2014)

Y.I. Jhon, Y.M. Jhon, G.Y. Yeom, and M.S. Jhon, “Orientation dependence of the fracture behavior of grapheme,” Carbon 66, 619 (2014)

R.L. Smith, P.S. Chung, S.H. Vemuri, L.T. Biegler, and M.S. Jhon, “Atomistically Tuning Lubricant Adhesion on Carbon Overcoat Surface,” IEEE Transactions on Magnetics 48 4273-4276 (2012).

S. An, M.S. Jhon, C. Han, and J. Maeng, “Thrust Generation of Heaving Foil in Microflow,” AIAA Journal 50 1201-1204 (2012).

O.J. Yoon, C.Y. Jung, I.Y. Sohn, H.J. Kim, B. Hong, M.S. Jhon, and N.E. Lee, “Nanocomposite nanofibers of poly(D, L-lactic-co-glycolic acid) and graphene oxide nanosheets,” Composites Part A-Applied Science and Manufacturing 42 1978-1984 (2011).

E. Gil, J.B. Park, J.S. Oh, M.S. Jhon, and G.Y. Yeom, “Ion Bombardment during the Deposition of SiOX by AC-Biasing in a Remote-Type Atmospheric Pressure Plasma System,” Journal of the Electrochemical Society 158 G58-G62 (2011).

S. Kim, C. Kim, Y.I. Jhon, J.K. Noh, S.H. Vemuri, R. Smith, K.Y. Chung, M.S. Jhon, and B.W. Cho, “Synthesis of layered-layered 0.5Li(2)MnO(3)center dot 0.5LiCoO(2) nanocomposite electrode materials by the mechanochemical process and first principles study,” Journal of Materials Chemistry 22 25418-25426 (2012).

S.K. Kang, M.H. Jeon, J.Y. Park, G.Y. Yeom, M.S. Jhon, B.W. Koo, and Y.W. Kim, “Effect of Halogen-Based Neutral Beam on the Etching of Ge2Sb2Te5,” Journal of the Electrochemical Society 158 H769-H771 (2011).

P. Jain, L.T. Biegler, and M.S. Jhon “Sensitivity of PEFC Models to Cathode Layer Microstructure,” Journal of the Electrochemical Society 157 B1222-B1229 (2010).

P. Jain, L.T. Biegler, and M.S. Jhon, “Optimization of Polymer Electrolyte Fuel Cell Cathodes,” Electrochem Solid-State Lett., 11 (10), B193-B196 (2008).

H. Chen, R. Zhang, I. Staroselsky, M. Jhon, “ Recovery of Full Rotational Invariance in Lattice Boltzmann Formulations for High Knudsen Number Flows,” Physica A-Statistical Mechanics And Its Applications, 362 (1), 125-131 (2006).

R.A. Escobar, S.S. Ghai, M.S. Jhon, and C. H. Amon, “Multi-Length and Time Scale Thermal Transport Using the Lattice Boltzmann Method with Application to Electronics Cooling,” International Journal of Heat and Mass Transfer, 49 (1-2), 97-107 (2006).

H.J. Choi, J. W. Kim, S-H. Yoon, R. Fujiura, M. Komatsu, and M. S. Jhon, “Synthesis and Electrorheological Characterization of Carbonaceous Particle Suspensions,” J. Mat. Sci. Lett. 18 (18) 1445-7 (1999).

X. Ma, J. Gui, L. Smoliar, K. Grannen, B. Marchon, M.S. Jhon, and C.L. Bauer, “Spreading of Perfluoropolyalkylether Films on Amorphous Carbon Surfaces,” J. Chem. Phys. 110 (6), 3129-37 (1999).

R.M. Webber, J.L. Anderson, and M.S. Jhon, “Hydrodynamic Studies of Adsorbed Diblock Copolymers in Porous Membranes,” Macromolecules 23 (4), 1026-34 (1990).

C.D. Han and M.S. Jhon, “Correlation of the First Normal Stress Difference with Shear Stress and of the Storage Modulus with Loss Modulus for Homopolymers,” J. Appl. Polym. Sci. 32 (3), 3809-40 (1986).

Full Publications

  1. M.S. Jhon “A Kinetic Theory of Classical Simple Liquids,” Ph.D. Thesis, University of Chicago (1974).
  2. M.S. Jhon and D. Forster, “Kinetic-Model of Simple Classical Liquids,” Bulletin of the American Physical Society, 19 (3), 283-4 (1974).
  3. M.S. Jhon and D. Forster, “A Kinetic Theory of Classical Simple Liquids,” Phys. Rev. A12 (1), 254-66 (1975).
  4. M.S. Jhon and R.C. Desai, “A New Sum Rule for Dense Fluids,” Phys. Letts. 59A (6), 448 50 (1977).
  5. M.S. Jhon and J.S. Dahler, “Velocity Correlation Functions for Harmonic Oscillator Chains,” Chem. Phys. Letts. 50 (2), 330-2 (1977).
  6. M.S. Jhon and J.S. Dahler, “Continued Fraction Formalism and its Application to Lattice Dynamics,” J. Chem. Phys. 68 (3), 812-20 (1978).
  7. M.S. Jhon, R.C. Desai, and J.S. Dahler, “Sum Rules and their Application to Surface Tension,” Chem. Phys. Letts. 56 (1), 151-5 (1978).
  8. M.S. Jhon, R.C. Desai, and J.S. Dahler, “The Origin of Surface Waves,” J. Chem. Phys. 68 (12), 5615-25 (1978).
  9. M.S. Jhon and J.S. Dahler, “A Kinetic Theory Analysis of Photodissociation,” J. Chem. Phys. 69 (2), 819-26 (1978).
  10. M.S. Jhon and J.S. Dahler, “A Mode-Mode Coupling Theory of Chemical Reaction in a Dense Fluid,” J. Stat. Phys. 20 (1), 3-18 (1979).
  11. M.S. Jhon, R.C. Desai, and J.S. Dahler, “A Kinetic Theory of Inhomogeneous Fluids: the Mean Field Approximation,” J. Chem. Phys. 70 (3), 1544-51 (1979).
  12. M.S. Jhon, R.C. Desai, and J.S. Dahler, “Surface Tension of a Simple Fluid,” J. Chem. Phys. 70 (11), 5228-33 (1979).
  13. M.S. Jhon and J.S. Dahler, “Kinetic Theory of a Photolytically Driven Hot-Atom Reaction,” J. Chem. Phys. 70 (11), 5292-5 (1979).
  14. M.S. Jhon, S. Fesciyan, and J.S. Dahler, “Coherent Scattering Law for Dilute Polymer Solution: Continued Fraction Formalism,” J. Polym. Sci.: Polym. Phys. Ed. 18, 529-36 (1980).
  15. J. Budimir, M.S. Jhon, and J.S. Dahler, “Dynamics of a Finite Harmonic Oscillator Chain with a Surface Impurity,” Surf. Sci. 93,175-91 (1980).
  16. S. Fesciyan, M.S. Jhon, and J.S. Dahler, “Effects of Memory on the Coherent Scattering Function for the Rouse-Zimm Model of Dilute Polymer Solutions,” J. Polym. Sci.: Polym. Phys. Ed. 18, 2077-82 (1980).
  17. M.S. Jhon, J.S. Dahler, and R.C. Desai, “A Theory of the Liquid-Vapor Interface,” Advances in Chemical Physics, eds. I. Prigogine and S.A. Rice (John Wiley, New York, N.Y.) 46, 279 362 (1981).
  18. J.J. Ou, J.S. Dahler, and M.S. Jhon, “Dynamic Structure Factor of a Dilute Polymer Solution: Generalized Mean Field Approximation,” J. Chem. Phys. 74 (2), 1495-8 (1981).
  19. M.S. Jhon and J.S. Dahler, “A Kinetic Theory of Dense Fluids: Test-particle Kinetic Equation,” J. Chem. Phys. 74 (4), 2477-93 (1981).
  20. M.S. Jhon, S. Fesciyan, and J.S. Dahler, “Effects of Memory on the Coherent Scattering Function of Rouse Chain,” J. Chem. Phys. 74 (7), 4106-13 (1981).
  21. R. Armstrong and M.S. Jhon, “On the Stability Criteria of the Kirkwood-Riseman Diffusion Tensor,” J. Chem. Phys. 75 (8), 4160-2 (1981).
  22. G. Sekhon, R. Armstrong, and M.S. Jhon, “The Origin of Polymer Migration in a Nonhomogeneous Flow Field,” J. Polym. Sci.: Polym. Phys. Ed. 20, 947-52 (1982).
  23. R. Armstrong and M.S. Jhon, “A Study of Polymer Conformation in Turbulent Flow,” J. Chem. Phys. 77(8), 4256-7 (1982).
  24. M.S. Jhon and J.S. Dahler, “Response Function Theory and its Application to Polymer Dynamics,” J. Chem. Phys. 79 (2), 1013-6 (1983).
  25. R. Armstrong and M.S. Jhon, “Turbulence Induced Change in the Conformation of Polymer Molecules,” J. Chem. Phys. 79 (6), 3143-7 (1983).
  26. M.S. Jhon and H.L. Frisch, “Sorption in Inhomogeneous Slabs,” J. Chem. Phys. 79 (8), 3991-5 (1983).
  27. R. Armstrong and M.S. Jhon, “A Molecular Theory of Turbulence Induced Polymer Drag Reduction,” Polymer Theory Abstracts: 1, 4-5 (1983).
  28. M.S. Jhon, “The Motion of Colloidal Particles in Polymeric Liquids,” Abstr. Pap. Am. Chem. S., 186: (Aug) 14-coll 1983.
  29. M.S. Jhon, “Molecular Theory of Polymer Induced Drag Reduction,” CIT News, 14 5(1984).
  30. R. Armstrong and M.S. Jhon, “A Self-Consistent Theoretical Approach to Polymer Induced Turbulent Drag Reduction,” Chem. Eng. Comm. 30, 99-111 (1984).
  31. M.S. Jhon and K.F. Freed, “Polymer Migration in Newtonian Fluids,” J. Polym. Sci.: Polym. Phys. Ed. 23, 955-71 (1985).
  32. R. Armstrong, M.S. Jhon, and J.S. Dahler, “Resolvent Operator Method for Solving Rheological Equations of State,” J. Chem. Phys. 82 (5), 2440-4 (1985).
  33. M.M. Domach, R. Armstrong, and M.S. Jhon, “Cell Mass Concentration Variance Resulting from Fluctuations in the Incoming Nutrient Concentration to a Chemostat,” Bull. Math. Biology 47 (3), 337-42 (1985).
  34. D.C. Prieve, M.S. Jhon, and T.L. Koenig, “Anomalous Migration of a Rigid Sphere in Torsional Flow of a Viscoelastic Fluid II: Effect of Shear Rate,” J. Rheology 29 (6), 639-54 (1985).
  35. R. Armstrong and M.S. Jhon, “Adsorbed Polymers Under Flow: a Stochastic Dynamical System Approach,” J. Chem. Phys. 83 (5), 2475-81 (1985).
  36. C.D. Han and M.S. Jhon, “Correlation of the First Normal Stress Difference with Shear Stress and of the Storage Modulus with Loss Modulus for Homopolymers,” J. Appl. Polym. Sci. 32 (3), 3809-40 (1986).
  37. T. Karis and M.S. Jhon, “Flow-Induced Anisotropy in the Susceptibility of a Particle Suspension,” Proc. National Academy of Science, U.S.A., 83 (14), 4973-7 (1986).
  38. M.S. Jhon, G. Sekhon, and R. Armstrong, “The Response of Polymer Molecules in a Flow,” Advances in Chemical Physics, eds. I. Prigogine and S.A. Rice (John Wiley, New York, N.Y.), 66, 153-211 (1987).
  39. H.J. Choi, D.C. Prieve, and M.S. Jhon, “Anomalous Lateral Migration of a Rigid Sphere in Torsional Flow of a Viscoelastic Fluid-Effect of Polymer Concentration and Solvent Viscosity,” J. Rheology 31 (4), 317-21 (1987).
  40. M.S. Jhon, H.J. Choi, and R. Armstrong, “Polymer Conformation in an Extensional Flow with Bead-Wall Hydrodynamic Interaction,” Korean J. Chem. Eng. 5 (2), 131-8 (1988).
  41. M.S. Jhon and M.S. Pyo, “Magnetic Information Technology,” Science (Korean), pp. 70 80, June (1988).
  42. T.E. Karis and M.S. Jhon, “Analysis of Single-Domain Particle Flow Orientation Data,” J. Appl. Phys. 64 (10), 5843-5 (1988).
  43. M.S. Jhon, R.J. Metz, and K.F. Freed, “Effective Medium Theory for Elastic Matrix Composites Containing Dispersed Particulates,” J. Stat. Phys. 52 (5-6), 1325-42 (1988).
  44. M.S. Jhon, “The Particulate Media for Magnetic Recording – Characterization Techniques for Particle Dispersion and Orientation,” Polym. Prepr. 29 (2), 252-3 (1988).
  45. M.S. Jhon, “The Particulate Media for Magnetic Recording – Characterization Techniques for Particle Dispersion and Orientation,” Abstr. Pap. Am. Chem. S. 196: 187-Poly Sep 25 1988.
  46. H.J. Choi, D.C. Prieve, and M.S. Jhon, “Direction of Lateral Migration of a Rigid Sphere in a Homologous Series of Polymer Solutions,” Polymer Reprints (Japan), 37, 245-7 (1988).
  47. J.L. Anderson, J.T. Kim, R.M. Webber, and M.S. Jhon, “Restricted Transport in Micropores with Adsorbed Polymers,” Polym. Prepr. 30 (1), 381-2 (1989).
  48. J.L. Anderson, J.T. Kim, R.M. Webber, and M.S. Jhon, “Restricted Transport in Micropores with Adsorbed Polymers,” Abstr. Pap. Am. Chem. S. 197: 239-POLY APR 9 1989.
  49. T.E. Karis, M.S. Jhon, R.B. Hammond, M.F. Lee, R.A. Lyncheski, and T.O. Montelbano, “An Apparatus for Characterizing the Magnetic Recording Slider/Disk Interface Flyability,” IBM Research Report (Confidential), RJ 6715(64563), IBM (1989).
  50. M.S. Jhon, H.J. Choi, and R. Armstrong “Turbulence of a Non-Newtonian Fluid,” Korean J. Chem. Eng. 6 (2), 126-30 (1989).
  51. M.S. Jhon and T.E. Karis, “The Particulate Media for Magnetic Recording: Characterization Techniques for Particle Dispersion and Orientation,” Polymers in Information Storage Technology, edited by K.L. Mittal, Plenum Publishing, New York, N.Y. pp. 299-310 (1989).
  52. M.S. Jhon, Principles of Transport Processes I, Carnegie Mellon University (1989).
  53. R.M. Webber, J.L. Anderson, and M.S. Jhon, “Hydrodynamic Studies of Adsorbed Diblock Copolymers in Porous Membranes,” Macromolecules 23 (4), 1026-34 (1990).
  54. Y.W. Inn, H.J. Choi, and M.S. Jhon, “Effects of Temperature on Polymer Migration,” Korean J. Chem. Eng. 7(2), 138-41 (1990).
  55. R.M. Webber, M.S. Jhon, and J.L. Anderson, “Effects of Adsorbed Diblock Copolymers on Flow Past Surfaces,” Polym. Mater. Sci. Eng. 63, 252-6 (1990).
  56. R.M. Webber, M.S. Jhon, and J.L. Anderson, “Effects of Adsorbed Diblock Copolymers on Flow Past Surfaces,” Abstr. Pap. Am. Chem. S. 200: 57-PMSE, Part 2 AUG 26 1990.
  57. M.S. Jhon and H.J. Choi, “Kolmogorov Microscales for Non-Newtonian Fluids,” Korean J. Rheol. 2(1), 87-9 (1990).
  58. M.S. Jhon, “Book Reviews on Chaos and Integrability in Nonlinear Dynamics: an Introduction by M. Tabor,” J. Am. Chem. Soc. 112 (11), 4615 (1990).
  59. T.E. Karis, C.M. Seymour, and M.S. Jhon, “The Coupled Relaxation Model for Toner Melt Rheology,” Poly. Eng. Sci. 31 (2), 99-103 (1991).
  60. T.E. Karis and M.S. Jhon, “Processing Effects on the Flow Orientation Properties of a Magnetic Particle Suspension,” Colloids and Surfaces 53(3-4), 393-410 (1991).
  61. R.M. Crone, M.S. Jhon, B. Bhushan, and T.E. Karis, “Transient Behavior of a Rough Slider Dropped over a Rough Rigid-Disk Surface,” Adv. Info. Storage Sys. 1, 189-212 (1991).
  62. R.M. Crone, M.S. Jhon, B. Bhushan, and T.E. Karis, “Numerical Simulation of Dynamic Slider Loading and Transient Slider Response to Surface Defects,” Adv. Info. Storage Sys. 3, 15-31 (1991).
  63. R.M. Crone, M.S. Jhon, B. Bhushan, and T.E. Karis, “Modeling the Flying Characteristics of a Rough Magnetic Head over a Rough Rigid-Disk Surface,” J. Tribology 113 (4), 739-49 (1991).
  64. M.S. Jhon, “Current Status of Korean Science and Technology,” Korean Business Week 79- 81, November 27th 1991.
  65. T.M. Kwon, M.S. Jhon, and T.E. Karis, “A Device for Measuring Concentration and Dispersion Quality of Rod and Plate-Like Magnetic Particle Suspensions,” IEEE Instrumentation and Measurement Technology Conference, IEEE Catalog No. 91-CH2940-5, 374-90 (1991).
  66. T.M. Kwon, M.S. Jhon, and T.E. Karis, “Concentration and Dispersion Quality Measurement for Ba-Ferrite Particle Suspensions,” J. Magnetics Society of Japan 15(S2), 663-8 (1991).
  67. K.S. Yang, H.J. Choi, C.B. Kim, and M.S. Jhon, “A Study of Drag Reduction by Polymer Additives in Rotating Disk Geometry,” Korean J. Rheology 3 (1), 76-85 (1991).
  68. R.M. Crone, P.R. Peck, M.S. Jhon, T.E. Karis, and B. Bhushan, “The Simulation of the Slider-Disk Interface under Ultra-Low Flying Conditions,” J. Magnetics Society of Japan 15 (S2), 525-30 (1991).
  69. T.M. Kwon, A.R. Dharmosetio, and M.S. Jhon, “Response of Magnetic Colloidal Suspension in Externally Imposed Magnetic and Hydrodynamic Fields,” Abstr. Pap. Am. Chem. S. 202, 144-COLL, Part 1 AUG 25 1991.
  70. T.M. Kwon, M.S. Jhon, and T.E. Karis, “Dispersion Quality of Rod-like ?-Fe2O3 and CrO2 and Plate-like Ba-Ferrite Suspensions for Magnetic Recording,” Adv. Info. Storage Sys. 4, 87-101 (1992).
  71. T.M. Kwon, M.S. Jhon, and T.E. Karis, “Rheomagnetic Measurements on Suspensions of Magnetic Recording Particles,” J. Appl. Phys. 72 (8), 3770-7 (1992).
  72. R.M. Crone, P.R. Peck, M.S. Jhon, T.E. Karis, and B. Bhushan, “The Flow Factor Approach in Air Bearing Simulations,” Adv. Info. Storage Sys. 4, 123-38 (1992).
  73. R.M. Crone, M.S. Jhon, T.E. Karis, and B. Bhushan, “The Behavior of a Magnetic Sliders over a Rigid-Disk Surface: a Comparison of Several Approximations of the Modified Reynolds Equations,” Adv. Info. Storage Sys. 4, 105-21 (1992).
  74. R.M. Crone, P.R. Peck, M.S. Jhon, and T.E. Karis, “Scaling Criteria for Slider Miniaturization Using the Generalized Reynolds Equation,” ASME Paper No. 92-TRIB-38 (1992).
  75. T.M. Kwon, M.S. Jhon, and T.E. Karis, “A Device for Measuring the Concentration and Dispersion Quality of Magnetic Particle Suspensions,” IEEE Trans. on Instrumentation and Measurement 41 (1), 10-16 (1992).
  76. M.H. Azarian, C.L. Bauer, and M.S. Jhon, “Tribology of Carbon Overcoatings in Both Sliding and Flying Modes,” Proceedings of the First International Workshop on Microtribology, R. Kaneko and Y. Enomoto, eds., Tokyo, Japan, 276-97 (1992).
  77. T.M. O’Connor, M.S. Jhon, M.H. Azarian, and C.L. Bauer, “Wear Characteristics in Thin-Film Media,” Proceedings of the First International Workshop on Microtribology, R. Kaneko and Y. Enomoto, eds., Tokyo, Japan, 79-86 (1992).
  78. M.H. Azarian, C.L. Bauer, T.M. O’Connor, and M.S. Jhon, “Head-Disk Interaction in Gas-Lubricated Slider Bearings,” Proceedings of the First International Workshop on Microtribology, R. Kaneko and Y. Enomoto, eds., Tokyo, Japan, 39-51 (1992).
  79. H.J. Choi and M.S. Jhon, “The Concentration Equation of Polymer Solution in Nonhomogeneous Flow Field,” Theoretical and Applied Rheology: Proceedings of the XIth International Congress on Rheology, Brussels, Belgium, August 17-21, 1992, P. Moldenaers and R. Keunings, eds. Elsevier Science Publishers, location? 464-6, (1992).
  80. M.H. Azarian, C.L. Bauer, T.M. O’Connor, R.M. Crone, and M.S. Jhon, “Critical Operating Conditions for a Novel Flying Tester,” in Tribology and Mechanics of Magnetic Storage Systems, Vol. VIII, Society of Tribologists and Lubrication Engineers, Park Ridge, IL, SP35, 1-10 (1992).
  81. Y.D. Yoon, H.J. Choi, P.L. Frattini, and M.S. Jhon, “Study on the Production Procedure Automatic Control of Magnetic Recording Media by Rheomagnetic Measurement,” Yongu Pogo - Kungnip Kongop Kisulwon, 43, 713-30 (1993).
  82. Y.D. Yoon, H.J. Choi, P.L. Frattini, and M.S. Jhon, “Study on the Rheo-optical Measurement of Magnetic Particle Suspensions,” Yongu Pogo - Kungnip Kongop Kisulwon, 43, 694-711 (1993).
  83. T.M. O’Connor, M.S. Jhon, M.H. Azarian, and C.L. Bauer, “Wear Characteristics in Thin-Film Media,” Wear 168 (1-2), 77-83 (1993).
  84. M.H. Azarian, C.L. Bauer, T.M. O’Connor, and M.S. Jhon, “Head Disk Interaction in Gas-Lubricated Slider Bearings,” Wear 168 (1-2), 49-57 (1993).
  85. M.H. Azarian, C.L. Bauer, T.M. O’Connor, R.M. Crone, and M.S. Jhon, “Critical Operating Conditions for a Novel Flying Tester,” Tribology Trans. 36 (4), 525-34 (1993).
  86. R.M. Crone, P.R. Peck, M.S. Jhon, and T.E. Karis, “Scaling Criteria for Slider Miniaturization Using the Generalized Reynolds Equation,” J. Tribology 115 (4), 566-72 (1993).
  87. T.M. Kwon, M.S. Jhon, H.J. Choi, and T.E. Karis, “Rheomagnetic Properties of Mixed Magnetic Particle Suspensions,” Colloids and Surfaces A80 (1), 39-46 (1993).
  88. T.M. Kwon, P.L. Frattini, L.N. Sadani, and M.S. Jhon, “Rheo-optical Study of Magnetic Particle Orientation Under External Fields,” Colloids and Surfaces A80 (1), 47-61(1993).
  89. T.E. Karis and M.S. Jhon, Guest Editors, “Special Issue - Ferro/Electro Fluids and Magnetic Particle Suspensions,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 80 (1), R7-R8 (1993).
  90. C.B. Kim, K.S. Yang, H.J. Choi, I.S. Kim, and M.S. Jhon, “Drag Reducing Effects of Polymer Additives on Coal-Water Mixtures in Rotating Disk Systems,” Korean Society of Mechanical Engineers Journal 7(1), 48-54 (1993).
  91. M.H. Azarian, C.L. Bauer, and M.S. Jhon, “Tribology of Thin-Film Media in both Flying and Sliding Modes,” Wear 168 (1-2), 59-76 (1993).
  92. R.M. Crone and M.S. Jhon, “Mathematical Modeling of the Head-Disk Interface,” J. Appl. Phys. 73, 6016 (1993).
  93. P.R. Peck, R.-N. Kono, M.S. Jhon, and T.E. Karis, “A Novel Accelerated Wear Test for Magnetic Recording Disks,” Digest of International Magnetics Conference, Folkets Hus, Stockholm, Sweden, BQ 14, 1993; IEEE Trans. Magnetics 29 (6), 3969-71(1993).
  94. R.-N. Kono, M.S. Jhon, and T.E. Karis, “Substrate Birefringence Measurement Techniques,” Optical Data Storage, 1994 Technical Digest Series, Optical Society of America, Vol. 10, pp. 19-20.
  95. K.S. Yang, H.J. Choi, C.B. Kim, I.S. Kim, and M.S. Jhon, “Characterization of Turbulent Drag Reduction in Rotating Disk System,” Korean J. Chem. Eng. 11 (1), 8-13 (1994).
  96. R.M. Crone, M.S. Jhon, and H.J. Choi, “The Concentration Equation of Polymer Solutions in Non-homogeneous Flow Field,” J. Molecular Liquids 59 (2-3), 115-28 (1994).
  97. H.J. Choi, Y.D. Park, P.L. Frattini, and M.S. Jhon, “Rheo-optical Measurements on Suspensions of Magnetic Recording Particles,” J. Appl. Phys. 75 (10), 5579 (1994).
  98. P.R. Peck, M.S. Jhon, R.F. Simmons, and T.J. Janstrom, “Mathematical Modeling of Lubrication for the Head-Disk Interface Using Incompressible Fluids,” J. Appl. Phys. 75 (10), 5747-9 (1994).
  99. R.-N. Kono, M.S. Jhon, and T.E. Karis, “Depth Distribution of Birefringence in Magneto-optical Recording Disk Substrates,” J. Appl. Phys. 75 (10), 6867-9 (1994).
  100. M.S. Jhon, P.R. Peck, R.F. Simmons, and T.J. Janstrom, “Behavior of the Head-Disk Interface in Future Disk Drives,” IEEE Trans. Magnetics 30 (2), 410-16 (1994).
  101. H.J. Choi, Y.W. Inn, and M.S. Jhon, “Effects of Temperature on Polymer Migration II: Concentration Equation,” Korean J. Chem. Eng. 11 (3), 145-52 (1994).
  102. M.S. Jhon, “Magnetic Hard Disk Drive Systems,” Data Storage Systems Center Newsletter, 5(1) (1994).
  103. T.E. Karis, R.D. Johnson, V.J. Novotny, and M.S. Jhon, “Ultrasonic Scission of Perfluoropolyethers,” J. Magn. Soc. Japan 18 (S1), 509-12 (1994).
  104. T.M. Kwon, H.J. Choi, and M.S. Jhon, “Characterization of Ba-Ferrite Suspensions,” J. Magn. Soc. Japan 18 (S1), 253-6 (1994).
  105. P.R. Peck, S.-C. Kang, and M.S. Jhon, “Rarefaction in Ultra-low Flying Sliders Focusing on Analytic and Kinetic Theory Solutions,” J. Magn. Soc. Japan 18 (S1), 503-8 (1994).
  106. P.R. Peck, H.J. Kim, M.S. Jhon, R.F. Simmons, and T.J. Janstrom, “Dynamic Modeling of a Liquid Bearing in the Head-Disk Interface,” J. Magn. Soc. Japan 18 (S1), 513-6 (1994).
  107. R.-N. Kono, M.S. Jhon, and T.E. Karis, “A Comparison of Techniques for Substrate Birefringence Measurement,” The Society of Photo-optical Instrumentation Engineers Proceedings 2338, 16-28 (1994).
  108. H.J. Choi, T.W. Kim, M.S. Cho, S.K. Kim, and M.S. Jhon, “Polyaniline for Dry-Base ER Fluid,” Proceedings of the First International Conference on Advanced Polymers via Macromolecular Engineering, 41, Vassar Campus, Poughkeepsie, NY, June 24-28, 1995.
  109. P.R. Peck, R.-N. Kono, M.S. Jhon, and T.E. Karis, “Acoustic Emission Analysis During High Velocity Accelerated Wear Test,” Adv. Info. Storage Sys. 6, 121-35 (1995).
  110. M.S. Jhon, P.R. Peck, S.-C. Kang, B.L. Wang, I.-E. Kim, and K.-O. Park, “Sliders for the Next Generation Magnetic Hard Disk Drive Systems - Numerical Simulation,” Proc. 3rd. Int. Sym. Phys. Mag. Mat. Vol. 1, 483-9 (1995); J. Korean Magnetic Society 5(5), 695-701 (1995).
  111. B.G. Min, J.W. Choi, H.R. Brown, D.Y. Yoon, T.M. O’Connor, and M.S. Jhon, “Spreading Characteristics of Thin Liquid Films of Perfluoropolyalkylethers on Solid Surfaces: Effects of Chain-End Functionality and Humidity,” Trib. Lett. 1, 225-32 (1995).
  112. M. Scherge, X. Sui, X. Ma, C.L. Bauer, M.S. Jhon, and M.H. Kryder, “Tribological Properties of Barium Ferrite Films,” IEEE Trans. Magnetics 31 (6), 2928-30 (1995).
  113. T.M. Kwon, H.J. Choi, and M.S. Jhon, “Rheological Properties of Magnetic Particle Suspensions,” Proc. 3rd. Int. Sym. Phys. Mag. Mat. 1, 623-7 (1995); J. Korean Magnetic Society 5 (5), 667-71 (1995).
  114. T.M. O’Connor, M.S. Jhon, C.L. Bauer, B.G. Min, D.Y. Yoon, and T.E. Karis, “Surface Diffusion and Flow Activation Energies of Perfluoropolyalkylether,” Trib. Lett. 1, 219-23 (1995).
  115. S.-C. Kang, P.R. Peck, M.S. Jhon, and I.-E. Kim, “Transient Behavior of Negative Pressure Sliders over Rough Surface Including Comparisons with Positive Pressure Sliders,” ASME Symposium Proceedings, Adv. Info. Storage & Processing Sys. (eds. G.G. Adams, B. Bhushan, D. Miu, and J. Wickert), pp. 7-12 (1995).
  116. P.R. Peck, B.L. Wang, K.-O. Park, and M.S. Jhon, “Scaling Criteria for Slider Miniaturization Including Shape Effects,” ASME Symposium Proceedings, Adv. Info. Storage Sys. (eds. G.G. Adams, B. Bhushan, D. Miu, and J. Wickert), pp. 1-6 (1995).
  117. M.S. Cho, J.H. Lee, H.J. Choi, S.K. Kim, and M.S. Jhon, “Electrorheological Polyaniline Dispersions Using a Vertical Oscillation Rheometer,” Fabrication and Characterization of Advanced Materials, eds. W. Kim and J. Park, 527-32 (1996).
  118. C.A. Kim, J.T. Kim, H.J. Choi, C.B. Kim, K.Y. Kim, and M.S. Jhon, “Advanced Drag Reducing Polymer-Surfactant Material for District Heating Systems,” Fabrication and Characterization of Advanced Materials (eds. W. Kim and J. Park) 533-8 (1996).
  119. T.M. Kwon, H.J. Choi, and M.S. Jhon, “Rheomagnetic and Rheological Properties of Magnetic Particle Suspensions,” Fabrication and Characterization of Advanced Materials (eds. W. Kim and J. Park) 579-84 (1996).
  120. T.M. O’Connor, Y.-R. Back, M.S. Jhon, B.G. Min, D.Y. Yoon, and T.E. Karis, “Surface Diffusion of Thin Perfluoropolyalkylether Films,” J. Appl. Phys. 79 (8), 5788-90 (1996).
  121. P.R. Peck, K.-O. Park, M.S. Jhon, S.-C. Kang, and T.I.-P. Shih, “Transient Response of Ultra-low Flying Sliders over Contaminated and Textured Surfaces,” J. Appl. Phys. 79 (8), 5785-7 (1996).
  122. P.R. Peck, S.-C. Kang, I.-E. Kim, and M.S. Jhon, “Transient Behavior of Negative Pressure Sliders over Rough Surface Including Comparisons with Positive Pressure Sliders,” Adv. Info. Storage Sys. 7, 55-66 (1996).
  123. P.R. Peck, B.L. Wang, K.-O. Park, and M.S. Jhon, “Scaling Criteria for Slider Miniaturization Including Shape Effects,” Adv. Info. Storage Sys. 7, 67-7 (1996).
  124. T.E. Karis, D.J. Dawson, C.R. Davis, R.-N. Kono, G.S. Kim, M.S. Jhon, and S.J. Kim, “Rapid Prototyping Materials Rheology,” J. Imaging Science and Technology 40 (2), 147-55 (1996).
  125. H.J. Choi, H.S. Shon, H.J. Lee, and M.S. Jhon, “Rheological Characterization of Polyiso-butylene Solutions from Rod-climbing Experimentation,” Int. J. Polymer Anal. & Characterization 3, 75-88 (1996).
  126. H.J. Choi and M.S. Jhon, “Polymer-induced Turbulent Drag Reduction,” I&EC Res. 35(9), 2993-8 (1996).
  127. M.S. Jhon, T.W. Kwon, H.J. Choi, and T.E. Karis, “Microrheological Study of Magnetic Particle Suspensions,” I&EC Res. 35 (9), 3027-31 (1996).
  128. Y-L. Lin, T.I-P. Shih, and M.S. Jhon, “Computation of Drag and Lift on a Rotating Sphere in a Constant Shear Flow,” AIAA Paper 96-0082 (1996).
  129. T.E. Karis, G.W. Tyndall, and M.S. Jhon, “Thermal Barrier Film for Thermal Asperity-Resistant Magnetoresistive Magnetic Recording Heads,” Invention Disclosure (1/24/96), IBM Confidential.
  130. H.H. Gatzen, X. Ma, M. Scherge, M.S. Jhon, and C.L. Bauer, “Observations Regarding the Tribological Properties of SiC and AlTiC Sliders,” IEEE Trans. Magnetics, 32 (5), 3783-5 (1996).
  131. M.S. Cho, J.H. Lee, H,J. Choi, S.G. Kim and M. S. Jhon, “Electrorheological Polyaniline Dispersions using a Vertical Oscillation Rheometer,” Proceeding of 1st Joint Topical Conference on Processing, Structure and Properties of Polymeric Materials, pp. 382-4, AIChE, 1996.
  132. C.A. Kim, J.T. Kim, H.J. Kim, C.B. Kim, K.Y. Kim, and M. S. Jhon, “Drag Reduction Efficiency for Polymer-Surfactant Mixtures,” Proceeding of 1st Joint Topical Conference on Processing, Structure and Properties of Polymeric Materials, pp. 385-7, AIChE, 1996.
  133. H.J. Choi, M.S. Cho, J.H. Lee, S.G. Kim, and M. S. Jhon, “Electrorheological Fluid-System-Suspensions of Poly(Acene Quinone) Radicals,” 12th International Congress on Rheology, Quebec, Canada, August 18-23, 1996, eds. A. Ait-Kadi, J.M. Dealy, D.F. James and M.C. Williams, p. 481.
  134. H.J. Choi, M.S. Cho, and M.S. Jhon, “Electrorheological Properties of Poly (Acene Quinone) Radical Suspensions,” Polym. Adv. Tech, 8, 697-700 (1997).
  135. T.M. Kwon, M.S. Jhon, and H.J. Choi, “Rheological Study of Magnetic Particle Suspensions,” Mat. Chem. Phys, 49, 225-8 (1997).
  136. Y.-R. Back, D.-K. Chung, H.I. Jeong, S.-C. Kang, and M.S. Jhon, “Permeability Effects of the Ceramic Candle Filter on Back-Pulse Cleaning System,” Korean Society of Mechanical Engineers Journal 11 (3), 359-66 (1997).
  137. M.S. Cho, T.W. Kim, H.J. Choi, and M.S. Jhon, “Synthesis and Characterization of Electrorheological Copolyaniline,” J. Macromol. Sci.-Pure Appl. Chem. A34 (5), 901-6 (1997).
  138. M.S. Cho, T.W. Kim, H.J. Choi, and M.S. Jhon, “N-substituted Copolyaniline for Electrorheological Materials,” J. Mat. Sci. Lett. 16, 672-3 (1997).
  139. H.J. Choi, T.W. Kim, M.S. Cho, S.G. Kim, and M.S. Jhon, “Electrorheological Characterization of Polyaniline Dispersions,” Eur. Polym. J. 33(5), 699-703 (1997).
  140. T.M. Kwon, M.S. Jhon, and H.J. Choi, “Orientation Induced Optical Anisotropy in Colloidal Particle Suspensions,” Bull. Korean Chem. Soc. 18 (7), 767-70 (1997).
  141. M.S. Jhon, S.C.-Kang, and J.Y. Kim, “Information Storage Technology of NSIC,” J. Korean Magnetics Soc. 7 (2), 117-24 (1997).
  142. M.S. Jhon, B.L. Wang, and T.M. O’Connor, “Lubrication and Stiction in the Head-Disk Interface,” Proceedings of the International Conference on Micromechatronics for Information and Precision Equipment, pp. 414-23 (1997).
  143. S.-C. Kang, M.S. Jhon, and R.M. Crone, “Corrections to and Extensions of the Molecular Gas Lubrication Theory,” Proceedings of the International Conference on Micromechatronics for Information and Precision Equipment, pp. 77-83 (1997).
  144. C.A. Kim, K. Lee, H.J. Choi, C.B. Kim, K.Y. Kim, and M.S. Jhon, “Universal Characteristics of Drag Reducing Polyisobutylene in Kerosene,” J. Macromol. Sci.-Pure Appl. Chem. A34 (4), 705-11 (1997).
  145. M.S. Cho, H.J. Choi, and M.S. Jhon, “Electrorheological Characterization of Copolyaniline Suspensions,” Proceedings of 2nd Pacific Rim Conf. on Rheology, pp. 39-40 (1997).
  146. H.J. Choi, C.A. Kim, C.B. Kim, K.Y. Kim, and M.S. Jhon, “Characterization of Turbulent Drag Reducing Polymer,” Proceedings of 2nd Pacific Rim Conf. on Rheology, pp. 41-2 (1997).
  147. D.Y. Yoon, B.G. Min, H.R. Brown, R.H. Wang, T.M. O’Connor, M.S. Jhon, “Mobility and Wetting Characteristics of Thin Liquid Films of Perfluoropolyalkylethers on Solid Surfaces,” Abstr. Pap. Am. Chem. S., 213:39-COLL, Part 1 APR 13 (1997).
  148. M.S. Cho, Y. J. Choi, H.J. Choi, S.G. Kim, and M.S. Jhon, “Viscoelasticity of an Electrorheological Fluid Using a Vertical Oscillation Rheometer,” J. Molecular Liquids, 75(1),13-24 (1998).
  149. T.M. Kwon, M.S. Jhon, and H.J. Choi, “Viscosity of Magnetic Particle Suspensions,” J. Molecular Liq. 75 (2), 115-26 (1998).
  150. T.E. Karis and M.S. Jhon, “The Relationship between PFPE Molecular Rheology and Tribology,” Trib. Lett. 5, 283-6 (1998).
  151. G.W. Tyndall, T.E. Karis, and M.S. Jhon, “Spreading Profiles of Molecularly Thin Perfluoropolyether Films,” STLE PREPRINT NO. 98-TC-5E-3 (1998).
  152. C.A. Kim, H.J. Choi, C.B. Kim, and M.S. Jhon, “Drag Reduction Characteristics of Polysaccharide Xanthan Gum,” Macromol. Rapid Commun. 19 (8), 419-22 (1998).
  153. S.J. Vinay, N. Pesika, C.M. Schroeder, J. Sinclair, M. Gray, Y. Soong, R. Schehl, W. Sands, D. Finseth, and M.S. Jhon, “An Experimental Study of Multi-Particle Dynamics in Triboelectrostatic Systems,” Advanced Technologies for Particle Processing, AIChE 2, 56-62, (1998).
  154. H.J. Choi, M.S. Cho, and M.S. Jhon, “Hysteresis Behaviors of Poly(Naphthalene Quinone) Radical Electrorheological Fluid,” Proceedings of the 6th International Conference on “Electro-Rheological Fluids, Magneto-Rheological Suspensions and Their Applications” M. Nakano and K. Koyama ed., pp. 271-7, World Scientific, Singapore (1998).
  155. M.S. Jhon, S.C. Kang, and R.M. Crone, “Corrections to Molecular Gas Lubrication Theory,” 7th Joint MMM-Intermag Conference, p. 85 (1998).
  156. X. Ma, J. Gui, L. Smoliar, K. Grannen, B. Marchon, C.L. Bauer, and M.S. Jhon, “Complex Terraced Spreading of Perfluoropolyalkylether Films on Carbon Surfaces,” Phys. Rev. E. 59 (1), 722-7 (1999).
  157. X. Ma, J. Gui, K. J. Grannen, L.A. Smoliar, B. Marchon, M.S. Jhon, and C.L. Bauer, “Spreading of PFPE Lubricants on Carbon Surfaces: Effect of Hydrogen and Nitrogen Content,” Trib. Lett. 6 (1), 9-14 (1999).
  158. X. Ma, J. Gui, L. Smoliar, K. Grannen, B. Marchon, M.S. Jhon, and C.L. Bauer, “Spreading of Perfluoropolyalkylether Films on Amorphous Carbon Surfaces,” J. Chem. Phys. 110 (6), 3129-37 (1999).
  159. H.J. Choi, S.J. Vinay, and M.S. Jhon, “Rheological Properties of Particle Suspensions in a Polymeric Liquid,” Polymer 40 (10), 2869-72 (1999).
  160. J.H. Lee, M.S. Cho, H.J. Choi, and M.S. Jhon, “Effect of Polymerization Temperature on Polyaniline Based Electrorheorheological Suspensions,” Colloids Polym. Sci. 277 (1), 73-6 (1999).
  161. H.J. Choi, M.S. Cho, and M.S. Jhon, “Semiconducting Copolyaniline with Ionic Side Groups for Use in Electrorheological Fluids,” Polym. Mat. Sci. Eng. 80, 370-1 (1999).
  162. H.J. Choi, M.S. Cho, and M.S. Jhon, “Semiconducting Copolyaniline with Ionic Side Groups for Use in Electrorheological Fluids,” Book of Abstracts, 217th ACS National Meeting, Anaheim, Calif., March 21-25 (1999); 217:261-PMSE, Part 2 Mar 21 (1999).
  163. J.W. Kim, M.H. Noh, H.J. Choi, D.C. Lee, and M.S. Jhon, “Electrorheological Characteristics of Emulsion Polymerized SAN-Clay Nanocomposite Suspensions,” Polym. Mat. Sci. Eng. 80, 512-3 (1999).
  164. J.W. Kim, M.H. Noh, H.J. Choi, D.C. Lee, and M.S. Jhon, “Electrorheological Characteristics of Emulsion Polymerized SAN-Clay Nanocomposite Suspensions,” Book of Abstracts, 217th ACS National Meeting, Anaheim, Calif., March 21-25 (1999).
  165. H.J. Choi, H.J. Lee, S.T. Lim, and M.S. Jhon, “Rod-climbing Characterization of Kaolinite Suspended Polyisobutylene Solutions,” Poly. Eng. Sci. 39 (3), 469-73 (1999).
  166. H.J. Choi, J.H. Lee, M.S. Cho, and M.S. Jhon, “Electrorheological Characterization of Semiconducting Polyaniline Suspensions,” Poly. Eng. Sci. 39 (3), 493-9 (1999).
  167. S.-C. Kang, R.M. Crone, and M.S. Jhon, “A New Molecular Gas Lubrication Theory Suitable for Head-Disk Interface Modeling,” J. Appl. Phys. 85 (8), 5594-6 (1999).
  168. H.J. Choi, J. Kim, and M.S. Jhon, “Viscoelastic Characterization of Biodegradable Poly (3-hydroxybutyrate-co-3-hydroxyvalerate),” Polymer 40 (14), 4135-8 (1999).
  169. M.S. Jhon, D. Phillips, S.J. Vinay, and C. Messer, “The Dynamic Behavior of Thin-Film Lubricants,” 1999 Digests of INTERMAG 99 DA-01, The 1999 IEEE International Magnetics Conference.
  170. R.-N. Kono, M.S. Jhon, H.J. Choi, and C.A. Kim, “Effect of Reactive End Groups on the Rheology of Disk Lubricant Systems,” 1999 Digests of INTERMAG 99 BC-03, 1999 IEEE International Magnetics Conference.
  171. X. Ma, J. Gui, B. Marchon, M.S. Jhon, and C.L. Bauer, “Lubricant Replenishment on Carbon Coated Disks,” 1999 Digests of INTERMAG 99 EP-21, 1999 IEEE International Magnetics Conference.
  172. X. Ma, M.C. Kim, C.M. Schroeder, S.J. Vinay, and M.S. Jhon, “Monte Carlo Simulation of Lubricant Spreading on Nitrogenated and Hydrogenated Carbon Surfaces,” 1999 Digests of INTERMAG 99 BC-01, 1999 IEEE International Magnetics Conference.
  173. W. Qian, W.W. Childers, R.B. Prime, T.E. Karis, and M.S. Jhon, “Elastic Analysis of Thermally-Induced Stresses in the Magnetic Recording Head Gimbal Assembly,” J. Information Storage and Processing Systems 1, 159-68 (1999).
  174. W. Qian, W.W. Childers, R.B. Prime, T.E. Karis, and M.S. Jhon, “Influence of Adhesive Viscoelasticity on Thermal Bending of a Magnetic Recording Slider,” J. Information Storage and Processing Systems 1, 169-78 (1999).
  175. H.J. Choi, C.A. Kim, and M.S. Jhon, “Universal Drag Reduction Characteristics of Polyisobutylene in a Rotating Disk Apparatus,” Polymer 40 (16), 4527-30 (1999).
  176. H.J. Choi, J.W. Kim, S.G. Kim, and M.S. Jhon, “Synthesis and Electrorheological Characterization of Polyaniline-Na+-Montmorillonite Clay Suspensions,” Polymer Preprints 40 (2), 813-14 (1999).
  177. H.J. Choi, J.W. Kim, S.G. Kim, and M.S. Jhon, “Synthesis and Electrorheological Characterization of Polyaniline-Na+-Montmorillonite Clay Suspensions,” Abstr. Pap. Am. Chem. S. 218: 197-POLY, Part 2 AUG 22 (1999).
  178. H.J. Choi, C.A. Kim, R.-N. Kono, and M.S. Jhon, “Rheological Characterization of Perfluoropolyether Lubricants,” Polymer Preprints 40(2), 647-8 (1999).
  179. H.J. Choi, C.A. Kim, R.-N. Kono, and M.S. Jhon, “Rheological Characterization of Perfluoropolyether Lubricants,” Abstr. Pap. Am. Chem. S. 218: 87-POLY, Part 2 AUG 22 (1999).
  180. H.J. Choi, C.A. Kim, and M.S. Jhon, “Universal Characterization of Drag-Reducing Polyisobutylene,” Abstr. Pap. Am. Chem. S. 218: 31-IEC, Part 1 AUG 22 (1999).
  181. G.W. Tyndall, T.E. Karis, and M.S. Jhon, “Spreading Profiles of Molecularly Thin Perfluoropolyether Films,” Tribology Trans. 42 (3), 463-70 (1999).
  182. J. Kim, T. K. Shin, H.J. Choi, and M.S. Jhon, “Miscibility of Biodegradable Synthetic Aliphatic Polyester and Poly (epichlorohydrin) Blends,” Polymer 4 0(24), 6873-6 (1999).
  183. W. Qian, W.W. Childers, R.B. Prime, T.E. Karis, and M.S. Jhon, “Crown Sensitivity of Magnetic Recording Head Gimbal Assembly Bonded by Viscoelastic Adhesive,” Mech. Time-Dep. Materials 2 (4), 371-87 (1999).
  184. J.W. Kim, S.G. Kim, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheological Properties of Polyaniline-Na+-Montmorillonite Suspensions,” Macromol. Rapid Commun. 20 (8), 450-2 (1999).
  185. C.A. Kim, J. H. Sung, H.J. Choi, C.B. Kim, W. Chun, and M.S. Jhon, “Drag Reduction and Mechanical Degradation of Poly(ethylene oxide) in Seawater,” J. Chem. Eng. Japan 32 (6) 803-11 (1999).
  186. H.J. Choi, J. W. Kim, S-H. Yoon, R. Fujiura, M. Komatsu, and M. S. Jhon, “Synthesis and Electrorheological Characterization of Carbonaceous Particle Suspensions,” J. Mat. Sci. Lett. 18 (18) 1445-7 (1999).
  187. H.J. Choi, J.W. Kim, M.H. Noh, D.C. Lee, M.S. Suh, M.J. Shin, and M.S. Jhon, “SAN-Na+-Montmorillonite Nanocomposite for Electrorheological Material,” J. Mat. Sci. Lett. 18 (18) 1505-7 (1999).
  188. H.J. Choi, M.S. Cho, and M.S. Jhon, “Hysteresis Behaviors of Poly(Naphthalene Quinone) Radical Electrorheological Fluid,” International Journal of Modern Physics B 13 (14-16), 1901-7 (1999).
  189. R.-N. Kono, M.S. Jhon, H.J. Choi, and C.A. Kim, “Effect of Reactive End Groups on the Rheology of Disk Lubricant Systems,” IEEE Trans. Magn. 35 (5), 2388-90 (1999).
  190. M.S. Jhon, D. Phillips, S.J. Vinay, and C. Messer, “The Dynamic Behavior of Thin-Film Lubricants,” IEEE Trans. Magn. 35 (5), 2334-7 (1999).
  191. X. Ma, J. Gui, B. Marchon, M.S. Jhon, and C.L. Bauer, “Lubricant Replenishment on Carbon Coated Disks,” IEEE Trans. Magn. 35 (5), 2454-6 (1999).
  192. X. Ma, C.L. Bauer, M.S. Jhon, J. Gui, and B. Marchon, “Monte Carlo Simulations of Liquid Spreading on a Solid Surface,” Phys. Rev. E. 60 (5) 5795-801 (1999).
  193. H.J. Choi, M.S. Cho, C.A. Kim, and M.S. Jhon, “Effect of Temperature Gradient on Polymer Migration,” Poly. Eng. Sci. 39 (8) 1473-9 (1999).
  194. H.J. Choi, I.S. Sim, S.T. Lim, and M.S. Jhon, “Rod-Climbing in a Particle-Suspended Polymeric Liquid,” J. Appl. Polym. Sci. 75 (4), 572-5 (2000).
  195. H.J. Choi, T.M. Kwon, and M.S. Jhon, “Effects of Shear Rate and Particle Concentration on Rheological Properties of Magnetic Particle Suspension,” J. Mat. Sci. 35 (4), 889-94 (2000).
  196. H.J. Choi, C.A. Kim, T.M. Kwon, and M.S. Jhon, “Viscosity of Magnetic Particle Suspensions,” J. Magn. & Magn. Mat. 209 (1-3), 228-30 (2000).
  197. S.J. Vinay, D.M. Phillips, Y.S. Lee, C.M. Schroeder, X. Ma, M.C. Kim, and M.S. Jhon, “Simulation of Ultra-Thin Lubricant Films Spreading over Various Carbon Overcoats,” J. Appl. Phys. 87 (9), 6164-6 (2000).
  198. M.S. Cho, J.W. Kim, H.J. Choi, R.M. Webber, and M.S. Jhon, “Electrorheological Characteristics of Polyaniline and its Copolymer Suspensions with Ionic and Nonionic Substituents,” Colloid & Polymer Sci. 278(1), 61-4 (2000).
  199. J.W. Kim, M.H. Noh, H.J. Choi, D.C. Lee, and M.S. Jhon, “Synthesis and Electro-rheological Characteristics of SAN-Clay Composite Suspensions,” Polymer 41 (3), 1229-31 (2000).
  200. H.J. Choi, Y.H. Lee, C.A. Kim, and M.S. Jhon, “Microencapsulated Polyaniline Particles for Electrorheological Materials,” J. Mat. Sci. Lett. 19 (6), 533-5 (2000).
  201. T.K. Shin, J. Kim, H.J. Choi, and M.S. Jhon, “Miscibility of Biodegradable Aliphatic Polyester and Poly(vinyl acetate) Blends,” J. Appl. Polym. Sci. 77 (6), 1348-52 (2000).
  202. H.J. Choi, C.A. Kim, J-I. Sohn, and M.S. Jhon, “An Exponential Decay Function for Polymer Degradation in Turbulent Drag Reduction,” Polymer Degradation and Stability 69 (3), 341-6 (2000).
  203. H.J. Choi, C.A. Kim, J.H. Sung, C.B. Kim, W. Chun, and M.S. Jhon, “Universal Drag Reduction Characteristics of Saline Water-soluble Poly(ethlylene oxide) in a Rotating Disk Apparatus,” Colloid & Polymer Sci. 278 (7), 701-5 (2000).
  204. J.W. Kim, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheological Characterization of Emulsion Polymerized SAN-Clay Nanocomposite Suspensions,” Macromol. Symposia 155, 229-37 (2000).
  205. C.A. Kim, J.T. Kim K. Lee, H.J. Choi, and M.S. Jhon, “Mechanical Degradation of Dilute Polymer Solutions under Turbulent Flow,” Polymer 41 (21), 7611-5 (2000).
  206. M.C. Kim, D.M. Phillips, X. Ma, and M.S. Jhon, “The Molecular Spreading of Nonpolar Perfluoropolyether Films on Amorphous Carbon Surfaces,” J. Colloid Interface Sci. 228 (2), 405-9 (2000).
  207. M.C. Kim, and M.S. Jhon, “Microscopic Spreading of Nonreactive Perfluoro- polyalkylether Film on Amorphous Carbon Surfaces,” Korean J. Chem. Eng. 17(4), 444-8 (2000).
  208. H.J. Choi, S.G. Kim, J.W. Kim and M.S. Jhon, “Electroresponsive Phosphate Cellulose Suspensions,” Polym. Mater. Sci. Eng. 83, 500-1 (2000).
  209. H.J. Choi, S.G. Kim, J.W. Kim and M.S. Jhon, “Electroresponsive Phosphate Cellulose Suspensions,” Abstr. Pap. Am. Chem. S. 220: 241-PMSE, Part 2 AUG 20 (2000).
  210. H.J. Choi, S.G. Kim, Y.H. Hyun, and M.S. Jhon, “Rheological Characterization of Poly(ethylene oxide)-Clay Nanocomposites,” Polym. Prepr. 41 (2), 1183-4(2000).
  211. H.J. Choi, S.G. Kim, Y.H. Hyun, and M.S. Jhon, “Rheological Characterization of Poly(ethylene oxide)-Clay Nanocomposites,” Abstr. Pap. Am. Chem. S. 220: 96-POLY, Part 2 AUG 20 (2000).
  212. H.J. Choi, C.A. Kim, S.J. Vinay, and M.S. Jhon, “Effect of Degradation on Polymer-Induced Turbulent Drag Reduction,” Polym. Prepr. 41 (1), 301-2 (2000).
  213. H.J. Choi, C.A. Kim, S.J. Vinay, and M.S. Jhon, “Effect of Degradation on Polymer-Induced Turbulent Drag Reduction,” Book of Abstracts, 219th ACS National Meeting, San Francisco, CA, March 26-30, 2000.
  214. H.J. Choi, J.W. Kim, and M.S. Jhon, “Characteristics of Emulsion Intercalated Polymer-Na+-Montmorillonite Nanocomposite,” Polym. Mater. Sci. Eng. 82, 247-8 (2000).
  215. H.J. Choi, J.W. Kim, and M.S. Jhon, “Characteristics of Emulsion Intercalated Polymer-Na+-Montmorillonite Nanocomposite,” Book of Abstracts, 219th ACS National Meeting, San Francisco, CA, March 26-30, 2000.
  216. S.G. Kim, J.W. Kim, H.J. Choi, M.S. Suh, M.J. Shin, and M.S. Jhon, “Synthesis and Electrorheological Characterization of Emulsion-Polymerized Dodecylbenzenesulfonic Acid-doped Polyaniline Based Suspensions,” Colloid & Polymer Science 278 (9), 894-8 (2000).
  217. H.J. Choi, I.S. Sim, M.S. Jhon, “Aqueous Ferrous Choloride Doped Poly(p-phenylene) for Electrorheological Material,” J. Materials Science Letters 19 (18), 1629-32 (2000).
  218. H.J. Choi, M.S. Cho. J.W. Kim, R.M. Webber, and M.S. Jhon, “Effect of Ionic and Nonionic Substituents on Electrorheological Characteristics of Polyaniline Derivatives,” 7th Proc. Int. Conf. on Electro-Rheol. Fluids Magn.-Rheol. Suspensions, 494-501 (2000).
  219. J.W. Kim, H.J. Choi, S.H. Yoon, and M.S. Jhon, “Electrorheological Behavior of Carbonaceous Particle-Based Suspensions 7th Proc. Int. Conf. on Electro-Rheol. Fluids Magn.-Rheol. Suspensions 88-94 (2000).
  220. S.G. Kim, J.W. Kim, M.S. Cho, H.J. Choi, and M.S. Jhon, “Viscoelastic Characterization of Semiconducting Dodecylbenzenesulfonic Acid Doped Polyaniline Electrorheological Suspensions,” J. Appl. Poly. Sci. 79 (1), 108-14 (2001).
  221. C.A. Kim, D.S. Jo, H.J. Choi, C.B. Kim, and M.S. Jhon, “A High-Precision Rotating Disk Apparatus for Drag Reduction Characterization,” Polymer Testing 20, 43-8 (2001).
  222. S.J. Vinay and M.S. Jhon, “Particle ‘Swarm’ Dynamics in Triboelectric Systems,” J. Appl. Phys. 89 (2), 1436-40 (2001).
  223. S.J. Vinay and M.S. Jhon, ERRATUM: “Particle ‘Swarm’ Dynamics in Triboelectric Systems,” J. Appl. Phys. 90 (11), 5838 (2001).
  224. J.-I. Sohn, C.A. Kim, H.J. Choi, and M.S. Jhon, “Drag-Reduction Effectiveness of Xanthan Gum in a Rotating Disk Apparatus,” Carbohydrate Polymer 45 (1), 61-8 (2001).
  225. S.G. Kim, J. W. Kim, W. H. Jang, H. J. Choi and M.S. Jhon, “Electrorheological Characteristics of Phosphate Cellulose Based Suspensions,” Polymer 42(11), 5005-12 (2001).
  226. S.H. Park, S.T. Lim, T.K. Shin, H.J. Choi, and M.S. Jhon, “Viscoelasticity of Biodegradable Polymer Blends of Poly(3-hydroxybutyrate) and Poly(ethylene oxide),” Polymer 42 (13), 5737-42 (2001).
  227. H.J. Choi, S.G. Kim, Y.H. Hyun, and M.S. Jhon, “Preparation and Rheological Characteristics of Solvent-Cast Poly(ethylene oxide)-Montmorillonite Nanocomposites,” Macromolecular Rapid Commun. 22 (5), 320-5 (2001).
  228. J.W. Kim, S.G. Kim, H.J. Choi, M.S. Suh, M.J. Shin, and M.S. Jhon, “Synthesis and Electrorheological Characterization of Polyaniline and Na+-Montmorillonite Clay Nanocomposite,” International Journal of Modern Physics B 15, 657-64 (2001).
  229. H.J. Choi, M.S. Cho. J.W. Kim, R.M. Webber, and M.S. Jhon, “Effect of Ionic and Nonionic Substituents on Electrorheological Characteristics of Polyaniline Derivatives,” International Journal of Modern Physics B 15, 988-95 (2001).
  230. J.W. Kim, H.J. Choi, S.H. Yoon, and M.S. Jhon, “Electrorheological Behavior of Carbonaceous Particle-Based Suspensions,” International Journal of Modern Physics B 15, 634-40 (2001).
  231. S.G. Kim, H.J. Choi, and M.S. Jhon, “Preparation and Characterization of Phosphate Cellulose Based Electrorheological Fluids,” Macromolecular Chemistry and Physics 202 (4), 521-6 (2001).
  232. S.T. Lim, D.H. Kwon, H.J. Choi, J.-H. Kim, C.A. Kim, and M.S. Jhon, “Rheological Characteristics of Emulsified Vacuum Residue Oil System,” Polymer Science and Engineering, Abstr. Pap. Am. Chem. Soc. (2001) 221st IEC-134, Part 1 APR 1.
  233. M.S. Jhon, Principles of Fluid Mechanics, Prentice-Hall, 2001.
  234. M.S. Jhon, “Lubricants for Future Data Storage Devices,” Proceedings of the International Tribology Conference, Nagasaki, 2000, (Vol. I) Japanese Society of Tribologists, 125-131 (2001).
  235. D.M. Phillips, S.J. Vinay, X. Ma, and M.S. Jhon, “Simulation of Ultra-thin Lubricant Films Spreading Over Various Carbon Overcoats,” Proceedings of the International Tribology Conference, Nagasaki, 2000, (Vol. III) Japanese Society of Tribologists, 2225-2229 (2001).
  236. R.-N. Kono, S. Izumisawa, M.S. Jhon, C.A. Kim, D.M. Phillips, and H.J. Choi, “Rheology of Perfluoropolyether Lubricants,” Proceedings of the International Tribology Conference, Nagasaki, 2000, (Vol. III) Japanese Society of Tribologists, 2185-2190 (2001).
  237. S.T. Lim, Y.H. Hyun, H.J. Choi, and M.S. Jhon, “Rheological Properties of Biodegradable Aliphatic Polyester/Montmorillonite Nanocomposites,” Polymer Preprints 42 (1), 640-1 (2001).
  238. I.S. Sim, J.W. Kim, H.J. Choi, C.A. Kim, and M.S. Jhon, “Rheological and Mechanical Characteristics of Poly(p-phenylene) Based Suspensions,” Chemistry of Materials 13 (4), 1243-7 (2001).
  239. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Preparation and Electrorheology of Polyaniline-Coated PMMA Microsphere Suspensions in Silicone Oil,” Polymer Materials: Science & Engineering 84, xxx (2001).
  240. J. Kim, S.T. Lim, H.J. Choi, and M.S. Jhon, “Rheological and Mechanical Characteristics of Biodegradable Aliphatic Polyester and Poly(epichlorohydrin) Blends,” Macrom. Chem. Phys. 202 (12), 2634-40 (2001).
  241. W.H. Jang, J.W. Kim, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheology of Camphorsulfonic Acid-doped Polyaniline Suspensions,” Colloid & Polymer Sci. 279 (8), 823-7 (2001).
  242. Y.H. Lee, C.A. Kim, W.H. Jang, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheological Characteristics of Microencapsulated Polyaniline Particles with Melamine-Formaldehyde Resins,” Polymer 42 (19), 8277-83 (2001).
  243. D.M. Phillips, A.S. Khair, and M.S. Jhon, “Mathematical Simulation of Ultra-thin Polymeric Film Spreading Dynamics,” IEEE Trans. Magn. 37 (4), 1866-8 (2001).
  244. R.-N. Kono, S. Izumisawa, M.S. Jhon, C.A. Kim, and H.J. Choi, “Rheology of Perfluoropolyether Lubricants,” IEEE Trans. Magn. 37 (4), 1827-9 (2001).
  245. W.H. Jang, Y.H. Cho, J.W. Kim, H.J. Choi, J.-I. Sohn, and M.S. Jhon, “Electrorheological Fluids Based on Chitosan Particles,” J. Mater. Sci. Lett. 20 (11), 1029-31 (2001).
  246. J.W. Kim, M.S. Cho, H.J. Choi, S.G. Kim, C.A. Kim, and M.S. Jhon, “Electrorheological Fluid Characterization via a Vertical Oscillation Rheometer,” Polymer Testing 20 (8), 913-8 (2001).
  247. J. Kim, J.H. Kim, T.K. Shin, H.J. Choi, and M.S. Jhon, “Miscibility and Rheological Characteristics of Biodegradable Aliphatic Polyester and Linear Low Density Polyethylene Blends,” European Polymer J. 37(10), 2131-9 (2001).
  248. H.J. Choi, M.S. Cho, J.W. Kim, C.A. Kim, and M.S. Jhon, “A Yield Stress Scaling Function for Electrorheological Fluids,” Appl. Phys. Letters 78 (24), 3806-8 (2001).
  249. M.S. Jhon and H. J. Choi, “Lubricants in Future Data Storage Technology,” J. Ind. Eng. Chem. 7(5), 263-75 (2001).
  250. S.T. Lim, Y.H. Hyun, H.J. Choi, and M.S. Jhon, “Rheological Properties of Biodegradable Aliphatic Polyester/Montmorillonite Nanocomposites,” Abstr. Pap. Am. Chem. S. 221: 132-POLY, Part 2 APR 1 (2001).
  251. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Electrorheology of Polyaniline-Coated Poly(methyl methacrylate) Microsphere Suspensions in Silicone Oil,” Abstr. Pap. Am. Chem. S. 221: 281-PMSE, Part 2 APR 1 2001.
  252. J.W. Kim, H.J. Choi, C.A.Kim, and M.S. Jhon, “Synthesis and Electrorheology of Poly(p-phenylene) Particle,” Abstr. Pap. Am. Chem. S. 222: 219-POLY Part 2 AUG (2001).
  253. T.H. Kim, D.H. Kwon, Choi, H.J. Choi, Jhon, and M.S. Jhon, “Synthesis and Rheology of Polystyrene/Clay Nanocomposite,” Abstr. Pap. Am. Chem. S. 222: 40-IEC Part 1 AUG (2001).
  254. J.W. Kim, H.J. Choi, C.A. Kim, and M.S. Jhon, “Synthesis and Electrorheology of Poly(p-phenylene) Particle,” Polym. Prepr. 42 (2) 492-3 (2001).
  255. Y.H. Hyun, S.T. Lim, H.J. Choi, and M.S. Jhon, “Rheology of Poly(ethylene oxide)/Organoclay Nanocomposites,” Macromolecules 34 (23), 8084-93 (2001).
  256. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Electrorheology of Polyaniline-coated Poly(methyl methacrylate) Microsphere Suspensions in Silicone Oil,” Polymeric Materials Science and Engineering 84 505-6 (2001).
  257. I.E. Grossmann, M.S. Jhon, and R.D. Tilton, “Education Plan of Chemical Engineering at Carnegie Mellon,” XIX Jornadas de Ingenieria Quimica (eds. Ortiz de Uribe et al.), pp. 93-9, Universidad de Cantabria (2001).
  258. C.A. Kim, S.T. Lim, H.J. Choi, J-I. Sohn, and M.S. Jhon, “Characterization of Drag Reducing Guar Gum in a Rotating Disk Flow,” J. Appl. Poly. Sci. 83 (13), 2938-44 (2002).
  259. T.E. Karis, C.M. Seymour, R.-N. Kono, and M.S. Jhon, “Harmonic Analysis in Rheological Property Measurement,” Rheologica Acta. 41 (5), 471-4 (2002).
  260. S. Izumisawa and M.S. Jhon, “Stability Analysis of Ultra-thin Lubricant Films with Chain-End Functional Groups,” Trib. Lett. 12 (1), 75-81 (2002).
  261. S. Izumisawa and M.S. Jhon, “Stability Analysis and Computer Simulation of Nanoscale Lubricant Films with Chain-End Functional Groups,” J. Appl. Phy. 91 (10), 7583-5 (2002).
  262. D.M. Phillips and M.S. Jhon, “Dynamic Simulation of Nanoscale Lubricant Films,” J. Appl. Phy. 91 (10), 7577-9 (2002).
  263. T.H. Kim, L.W. Jang, D.C. Lee, H.J. Choi, and M.S. Jhon “Synthesis and Rheology of Intercalated Polystyrene/Na+-Montmorillonite Nanocomposite,” Macromolecular Rapid Commun. 23 (3), 191-5 (2002).
  264. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Electrorheology of Polyaniline-Coated Poly(Methyl Methacrylate) Microsphere Suspensions in Silicone Oil,” Electrorheological Fluids and Magnetorheological Suspensions, Proceedings of the 8th International Conference, Nice, France, July 9-13, 2001, 583-9 (2002).
  265. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Electrorheology of Polyaniline-Coated Poly(Methyl Methacrylate) Microsphere Suspensions in Silicone Oil,” Int. J Mod. Phys. B 16 (17-18), 2507-13 (2002).
  266. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Characteristics of Yield Stress Scaling Function for Electrorheological Fluids,” Int. J. Mod. Phys. B 16 (17-18), 2636-42 (2002).
  267. H.J. Choi, Y.H. Cho, M.S. Cho, and M.S. Jhon, “Characteristics of Yield Stress Scaling Function for Electrorheological Fluids,” Electrorheological Fluids and Magnetorheological Suspensions, Proceedings of the 8th International Conference, Nice, France, July 9-13, 2001, 726-32 (2002).
  268. J. W. Kim, Y. H. Cho, H. J. Choi, and M.S. Jhon, “Synthesis and Electrorheology of Phosphate Cellulose Suspensions,” Electrorheological Fluids and Magnetorheological Suspensions, Proceedings of the 8th International Conference, Nice, France, July 9-13, 2001, 557-563 (2002).
  269. J. W. Kim, Y. H. Cho, H. J. Choi, and M.S. Jhon, “Synthesis and Electrorheology of Phosphate Cellulose Suspensions,” Int. J Mod. Phys. B 16 (17-18), 2487-93 (2002).
  270. J.-I. Sohn, M.S. Cho, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheology of Semiconducting Poly(naphthalene quinone) Radical Particles,” Macrom. Chem. & Phys. 203 (8),1135-41 (2002).
  271. J.-I. Sohn, J.H. Sung, H.J. Choi, and M.S. Jhon, “Electrorheology of Undoped Poly(p-phenylene) Particle-Based Suspension, ” J. Mater. Sci. 37(19), 4057-61 (2002).
  272. Y.H. Cho, M.S. Cho, H.J. Choi, and M.S. Jhon, “Electrorheological Characterization of Polyaniline-coated Poly(methyl methacrylate) Suspensions,” Colloid & Polym. Sci. 280 (11), 1062-6 (2002).
  273. S.T. Lim, Y.H. Hyun, H.J. Choi, and M.S. Jhon, “Synthetic Biodegradable Aliphatic Polyester/Montmorillonite Nanocomposites,” Chem. Mater. 14 (4) 1839-44 (2002).
  274. S. Izumisawa and M.S. Jhon, “Molecular Simulation of Thin Polymer Films with Functional Endgroups,” J. Chem. Phys. 117 (8), 3972-77 (2002).
  275. T.E. Karis, C.A. Kim, and M.S. Jhon, “Harmonic Analysis of a Solder Paste under Large Amplitude Oscillatory Shear,” Macro. Mater. Eng. 287, 583-7 (2002).
  276. S.T. Lim, C.H. Lee, H.J. Choi, and M.S. Jhon, “Rheological Analysis of Melt Intercalated Polymer/Organoclay Nanocomposites,” Polym. Prepr. (American Chemical Society, Division of Polymer Chemistry) 43 (2), 1286-7 (2002).
  277. J.Y. Hwang, M.S. Cho, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheology of Polyaniline: Effect of Poly(methyl vinyl ether-alt-maleic acid) Stabilizer,” Polym. Mater. Sci. Eng. 87, 235-6 (2002).
  278. S.T. Lim, K. Lee, C.A. Kim, H.J. Choi, J.G. Kim, and M.S. Jhon, “Turbulent Drag Reduction and Mechanical Degradation of Polyisobutylene in Kerosene,” J. Ind. Eng. Chem. 8 (4), 365-9 (2002).
  279. J.-I. Sohn, J.H. Sung, H.J. Choi, and M.S. Jhon, “The Effect of Particle Concentration of Poly(p-phenylene) on Electrorheological Response,” J. Appl. Polym. Sci. 84 (13), 2397-403 (2002).
  280. M.S. Cho, H.J. Choi, W.S. Ahn, and M.S. Jhon, “Electrorheological Response of Mesoporous Materials under Applied Electric Fields,” Stud. Surf. Sci. Catal. 141, 479-86 (2002).
  281. M.S. Jhon, S. Izumisawa, Q. Guo, and Y.T. Hsia “Simulation of Perfluoropolyether Lubricant Films,” ASME2002-Trib### (2002).
  282. S.S. Ghai, J. H. Jeong, M.S. Jhon, C.Amon, and M.Asheghi, “Nanoscale Heat Transfer and its Application to Information Technology,” AIChE Conference Proceedings (2002).
  283. K. Lee, C.A. Kim, C.A., S.T. Lim, D.H. Kwon, H.J. Choi, and M.S. Jhon, “Mechanical Degradation of Polyisobutylene under Turbulent Flow,” Colloid & Polymer Sci. 280 (8), 779-82 (2002).
  284. J.-I. Sohn, S.T. Lim, S.H. Park, H.J. Choi, and M.S. Jhon, “Effect of a Reactive-type Flame Retardant on the Rheological and Mechanical Properties of PC/ABS Blends,” J. Materials Science 38 (7), 1485-91 (2003).
  285. J.H. Sung, H.J. Choi, and M.S. Jhon, “Electrorheological Response of Biocompatible Chitosan Particle in Corn Oil,” Mater. Chem. Phys. 77 (3), 778-83 (2003).
  286. D.P. Park, J.Y. Hwang, H.J. Choi, C.A. Kim, and M.S. Jhon, “Synthesis and Characterization of Polysaccharide Phosphates Based Electrorheological Fluids,” Materials Research Inovations 7 (3), 161-6 (2003).
  287. T.E. Karis, R.-N. Kono, and M.S. Jhon, “Harmonics Analysis of Grease Rheology,” J. Appl. Polym. Sci. 90 (2), 334-43 (2003).
  288. C.H. Lee, S.T. Lim, Y.H. Hyun, H.J. Choi, and M.S. Jhon, “Fabrication and Viscoelastic Properties of Biodegradable Polymer/Organophilic Clay Nanocomposites,” J. Mater Sci. Lett., 22 (1), 53-5 (2003).
  289. J.H. Jeong, M.S. Jhon, J.S. Halow, and J. VanOsdol, “Smoothed Particle Hydrodynamics: Applications to Heat Conduction,” Computer Physics Communications 153 (1), 71-84 (2003).
  290. C.A. Kim, M.S. Jhon, and H.J. Choi, “Scaling Functions of Polymer-Induced Turbulent Drag Reduction Focusing on the Polymer-Solvent Interaction,” J. Appl. Polym. Sci. 88 (7), 1836-9 (2003).
  291. M.S. Jhon, S. Izumisawa, Q. Guo, D.M. Phillips, and Y.T. Hsia, “Simulation of Nanostructured Lubricant Films,” IEEE Trans. Mag. 39(2), 754-8 (2003).
  292. S.T. Lim, H.J. Choi, and M.S. Jhon, “Dispersion Quality and Rheological Property of Polymer/Clay Nanocomposites – Ultrasonification Effect,” J. Ind. Eng. Chem. 9 (1), 51-7, (2003).
  293. Q. Guo, S. Izumisawa, D.M. Phillips, and M.S. Jhon, “Surface Morphology and Molecular Conformations for Ultrathin Lubricant Films with Functional Endgroups,” J. Appl. Phys. 93 (10), 8707-9 (2003).
  294. J.C. Ryu, J.W. Kim, H.J. Choi, S.B. Choi, J.H. Kim, and M.S. Jhon, “Liquid Crystal Added Electrorheological Fluid,” J. Materials Science Letters 22 (11), 807-9 (2003).
  295. S.T. Lim, M.S. Cho, H.J. Choi, and M.S. Jhon, “Rheological Characteristics of Iron Particle-based Magnetorheological Fluid under Low Magnetic Field Strength,” J. Ind. Eng. Chem. 9 (3), 336-9 (2003).
  296. M.S. Cho, Y.H. Cho, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheological Characteristics of Polyaniline-coated PMMA Microsphere: Size Effect,” Langmuir 19 (14), 5875-81 (2003).
  297. J.-I. Sohn, C. H. Lee, S. T. Lim, T. H. Kim, H. J. Choi, and M.S. Jhon, “Viscoelasticity and Relaxation Characteristics of Polystyrene/Clay Nanocomposite,” J. Materials Science 38 (9), 1849–52 (2003).
  298. T.H. Kim, S.T. Lim, C.H. Lee, H.J. Choi, and M.S. Jhon, “Preparation and Rheological Characterization of Intercalated Polystyrene/Organophilic Montmorillonite Nanocomposite,” J. Appl. Poly. Sci. 87 (13), 2106-112 (2003).
  299. M.S. Cho, Y.H. Cho, H.J. Choi, and M.S. Jhon, “Polyaniline-coated PMMA Microsphere for Electrorheological Fluids,” Synthetic Metals 135(1-3), 15-16 (2003).
  300. J.Y. Hwang, M.S. Cho, H.J. Choi, and M.S. Jhon, “Synthesis of Polyaniline Using Stabilizer and Its Electrorheological Properties,” Synthetic Metals 135(1-3), 21-22 (2003).
  301. J.W. Kim, L.W. Jang, H.J. Choi, and M.S. Jhon, “Physical and Electroresponsive Characteristics of the Intercalated Styrene-Acrylonitrile Copolymer/Clay Nanocomposite under Applied Electric Fields,” J. Applied Polymer Science 89 (3), 821-7 (2003).
  302. S.T. Lim, C.H. Lee, H.J. Choi, and M.S. Jhon, “Solidlike Transition of Melt Intercalated Biodegradable Polymer/Clay Nanocomposites,” J. Polym. Sci. Part B: Polym. Phys. 41 (17), 2052-61 (2003).
  303. D.P. Park, J.H. Sung, S.T. Lim, H.J. Choi, and M.S. Jhon, “Synthesis and Characterization of Organically Soluble Polypyrrole/Clay Nanocomposites,” J. Mater. Sci. Lett. 22 (18), 1299-1302 (2003).
  304. T.E. Karis, R.-N. Kono, C. A. Kim, M.S. Jhon, and H. J. Choi, “Nonlinear Rheology for a Grease,” J. Ind. Eng. Chem. 9 (4), 419-25 (2003).
  305. J.H. Sung, H.J. Choi, and M.S. Jhon, “Electrorheology of Chitosan Polysaccharide Suspension in Soybean Oil,” Colloid & Polymer Science 281 (12), 1196-1200 (2003).
  306. M.S. Jhon, S. Izumisawa, and H.J. Choi, “Solution Viscosity of Polar Perfluoropolyether Lubricants,” J. Ind. Eng. Chem. 9 (5), 508-12 (2003).
  307. W. T. Kim, K. -H. Hong, M.S. Jhon, J. VanOsdol, and D. Smith, “Forced Convection in a Circular Pipe with a Partially Filled Porous Medium,” KSME International Journal 17 (10), 1583-96 (2003).
  308. S. J. Park, M. S. Cho, S. T. Lim, H. J. Choi, M.S. Jhon, “Synthesis and Dispersion Characteristics of Multi-walled Carbon Nanotube Composites with Poly(methyl methacrylate) Prepared by In-situ Bulk Polymerization,” Macromolecular Rapid Commun. 24 (18), 1070-3 (2003).
  309. S.S. Ghai, M.S. Jhon, C.H.Amon, and Y.T. Hsia “Nanoscale Heat Transfer Modeling in Solids: Data Storage and Electronic Devices,” ASME2003-Trib-343 (2003).
  310. S.Y. Park, M.S. Cho, C.A. Kim, H.J. Choi, and M.S. Jhon, “Polyaniline Microsphere Encapsulated by Poly(methyl methacrylate) and Investigation of its Electrorheological Properties,” Colloid & Polymer Science 282 (2), 198-202 (2003).
  311. H.J. Choi, M.S. Cho, and M.S. Jhon, “Synthesis of PMMA/Polyaniline (core/shell) Particles and their Electrorheological Properties: Size effect,” Polymeric Materials Science and Engineering 88, 431-2 (2003).
  312. S.T. Lim, C.H. Lee, H.B. Kim, H.J. Choi, and M.S. Jhon, “Preparation and Characteristics of Biodegradable Aliphatic Polyester-Poly(Epichlorohydrin) Blend/Organoclay Nanocomposites,” Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 44 (1), 1114-5 (2003).
  313. S.T. Lim, C.H. Lee, H. Chung H.B. Kim, H.J. Choi, and M.S. Jhon, “Preparation and Characteristics of Biodegradable Aliphatic Polyester-Poly(Epichlorohydrin) Blend/ Organoclay Nanocomposites,” Abstracts of Papers, 225th ACS National Meeting, New Orleans, LA, United States, March 23-27, 2003.
  314. H.J. Choi, M.S. Cho, and M.S. Jhon, “Synthesis of PMMA/Polyaniline (core/shell) Particles and their Electrorheological Properties: Size effect,” Abstracts of Papers, 225th ACS National Meeting, New Orleans, LA, United States, March 23-27, 2003.
  315. R.A. Escobar, S.S. Ghai, M.S. Jhon, and C.Amon, “Time-dependent Simulations of Sub-Continuum Heat Generation effects in Electronic Devices using the Lattice-Boltzmann Method”, Micro-Electro-Mechanical Systems 5, 603-12 (2003).
  316. S.S. Ghai, R. Escobar, M.S. Jhon and C. Amon, “Sub-Continuum Heat Conduction in Electronics Using the Lattice-Boltzmann Method,” Advances in Electronic Packaging 2003, presented at [the] International Electronic Packaging Technical Conference and Exhibition, Maui, HI, United States, July 6-11, 2003 1, 257-64 (2003).
  317. M.C. Kim, D.M. Phillips, X. Ma, and M.S. Jhon, “Microscopic Spreading Characteristics of Nonpolar Perfluoropolyether Films,” Chem. Eng. Comm. 191 (1), 1-16 (2004).
  318. D.P. Park, J.H. Sung, C.A. Kim, H.J. Choi, M.S. Jhon, “Synthesis and Electrorheology of Potato Starch Phosphate” J. Applied Polymer Science 91 (3), 1770-3 (2004).
  319. B.S. Chae, Y.S. Lee, and M.S. Jhon, “The Scaling Behavior of Highly Aggregated Colloidal Suspension Microstructure and its Change in Shear Flow,” Colloid & Polymer Science 282 (3), 236-42 (2004).
  320. S.T. Lim, H.J. Choi, and M.S. Jhon, “Rod-climbing Characteristics of ?-Fe203 Suspended Polyisobutylene/Polybutene Solution,” J. Applied Polymer Science 92 (3), 1548-52 (2004).
  321. J.H. Sung, C.A. Kim, H.J. Choi, B.K. Hur, J.G. Kim, and M.S. Jhon, “Turbulent Drag Reduction Efficiency and Mechanical Degradation of Poly(acrylamide),” J Macromolecular Science, Physics B43 (2), 507-18 (2004).
  322. M.S. Jhon, “Physicochemical Properties of Nano Structured Perfluoropolyether Films,” Advances in Chemical Physics, ed. S.A. Rice (John Wiley, New York, N.Y.), 129, 1-70 (2004).
  323. C.H. Cho, H.J. Choi, J.W. Kim, and M.S. Jhon, “Synthesis and Electrorheology of Aniline/pyrrole Copolymer,” J. Material Science 39 (5), 1883-5 (2004).
  324. H.J. Choi, C.H. Cho, S.Y. Park, C.H. Cho, and M.S. Jhon, “Conducting Poly(Methyl Methacrylate)/Polyaniline (Core/Shell) Particles for Electrorheological Fluids,” Designed Monomers and Polymers 7 (1-2), 111-7 (2004).
  325. J.H. Sung, Y.H. Jang, H.J. Choi, and M.S. Jhon, “Synthesis and Electrorheological Characteristics of Microencapsulated Conducting Polymers,” Designed Monomers and Polymers 7 (1-2), 101-10 (2004).
  326. C.H. Cho, M.S. Cho, J.H. Sung, H.J. Choi, and M.S. Jhon “Preparation and Characterization of Poly(vinyl butyral)/Na+-Montmorillonite Nanocomposite,” J. Mat. Sci. 39 (9), 3151-3 (2004).
  327. S.T. Lim, C.H. Lee, H.B. Kim, H.J. Choi, and M.S. Jhon, “Polymer/organoclay Nanocomposites with Biodegradable Aliphatic Polyester and its Blend: Preparation and Characterization,” e-Polymers, no. 026, http://www.e-polymers.org (2004).
  328. S.T. Lim, C.H. Lee, H.B. Kim, H.J. Choi, and M.S. Jhon, “Polymer/organoclay Nanocomposites with Biodegradable Aliphatic Polyester and Its Blends: Preparation and Characterization,” Materials Research Innovations 8 (3), 130-1 (2004).
  329. Q. Guo, S. Izumisawa, M.S. Jhon, and Y.-T. Hsia, “Transport Properties of Nanoscale Lubricant Films,” IEEE Trans. Mag. 40 (4), 3177-9 (2004).
  330. M.S. Mayeed, T. Kato, M.S. Jhon, and Y. Mitsuya, “Surface Perturbations on the Perfluoropolyether Molecules in the Melt and the Gas-like Conditions, IEEE Trans. Mag. 40 (4), 3180-2 (2004).
  331. M.S. Cho, S.T. Lim, I.B. Jang, H.J. Choi, M.S. Jhon, “Encapsulation of Spherical Iron- Particle with PMMA and its Magnetorheology,” IEEE Trans. Mag. 40 (4), 3036-8 (2004).
  332. S.T. Lim, M.S. Cho, I.B. Jang, H.J. Choi, and M.S. Jhon, “Magnetorheology of Carbonyl-Iron Suspensions with Submicron-Sized Filler,” IEEE Trans. Mag. 40 (4), 3033-5 (2004).
  333. D.P. Park, J.H. Sung, H.J. Choi, and M.S. Jhon, “Electroresponsive characteristics of highly substituted phosphate starch,” J Mat. Sci. 39 (19), 6083-6 (2004).
  334. J. H. Sung, M. S. Cho, H. J. Choi, and M.S. Jhon, “Electrorheology of Semiconducting Polymers,” J. Ind. Eng. Chem. 10 (7), 1217-29 (2004).
  335. H. J. Choi, M.S. Cho, Y.H. Lee, Y.H. Cho, and M.S. Jhon, “Electrorheology of Conducting Polyaniline Composite Particles,” e-Polymers 2004, no. 030, http://www.e-polymers.org Materials Research Innovations 9 (1), 6-7 (2005).
  336. T.E. Karis, W.T. Kim, and M.S. Jhon, “Spreading and Dewetting in Nanoscale Lubrication,” Trib. Lett. 18 (1), 27-41 (2005).
  337. H.B. Kim, J.S. Choi, C.H. Lee, S.T. Lim, M.S. Jhon, and H.J. Choi, “Polymer Blend/organoclay Nanocomposite with Poly(ethylene oxide) and Poly(methyl methacrylate), European Polymer Journal 41 (4) 679-85 (2005).
  338. H.B. Kim, Y.H. Hyun, S.T. Lim, H.J. Choi, and M.S. Jhon, “Relationship between Structural Evolution and Rheological Measurements for Polymer plus Organoclay Nanocomposites,” e-Polymers, 019 (2005).
  339. H.J. Choi, S.J. Park, S.T. Kim, and M.S. Jhon, “Electrorheological Application of Multi-walled Carbon Nanotubes Composites,” Diamond and Related Materials, 14 (3-7), 766-9 (2005).
  340. Q. Guo, H.G. Chen, B.C. Smith, and M.S. Jhon, “A Wavelet / Moment Analysis for the Surface Morphology of Lubricant Films,” J. Appl. Phys. 97 (10), 10P301 (2005).
  341. Q. Guo, H.G. Chen, W.T. Kim, and M.S. Jhon, “Novel Multiscale Modeling and Its Application to the Integrated Head Disk Interface Simulation,” J. Appl. Phys. 97, 10P310 (2005).
  342. W. T. Kim, Y. Zhou, I. Staroselsky, H. Chen, and M.S. Jhon, “Nanoscale Air Bearing Modeling via Lattice Boltzmann Method,” J. Appl. Phys. 97 (10), 10P304 (2005).
  343. Q. Guo, L. Li, Y.-T. Hsia, and M.S. Jhon, “Stability Analysis of Ultra-thin Lubricant Films via Surface Energy Measurements and Molecular Dynamics Simulations,” J. Appl. Phys. 97 (10), 10P302 (2005).
  344. S. S. Ghai, W.T. Kim, R. A. Escobar, C. H. Amon, and M.S. Jhon, “A Novel Heat Transfer Model and Its Application to Information Storage Systems,” J. Appl. Phys. 97 (10), 10P703 (2005).
  345. C.A. Kim, H.J. Choi, J.H. Sung, H.M. Lee, M.S. Jhon, “Effect of Solubility Parameter of Polymer-Solvent Pair on Turbulent Drag Reduction,” Macromolecular Symposia 222, 169-174 (2005).
  346. H.J. Choi, S.T. Lim, S. Izumisawa, and M.S. Jhon, “Viscoelasticity and Solution Viscosity of Perfluoropolyether Lubricants” Tribology International, 38 (6-7), 682-6 (2005).
  347. S.T. Lim, M.S. Cho, H.J. Choi, and M.S. Jhon, “Magnetorheological Characterization of Organoclay added Carbonyl-iron Suspension,” International Journal of Modern Physics B: Condensed Matter Physics, Statistical Physics, Applied Physics 19 (7-8), 1142-8 (2005).
  348. S.T. Lim, M.S. Cho, H.J. Choi, and M.S. Jhon, “Magnetorheological Characterization of Organoclay added Carbonyl-iron Suspension,” Electrorheological Fluids and Magnetorheological Suspensions, Proceedings of the International Conference, 9th, Beijing, China 80-6 (2005).
  349. H.J. Choi, Q.Guo, P.S. Chung, and M.S. Jhon, “Nano/Micro-Rheology of Perfluropolyether Lubricants” Proceedings of WTC2005, World Tribology Congress III, WTC2005-64190
  350. I.B. Jang, H.B. Kim, J.Y. Lee, J.L. You, H.J. Choi, and M.S. Jhon, “Role of Organic Coating on Carbonyl Iron Suspended Particles in Magnetorheological Fluids,” J. Appl. Phys. 97, 10Q912 (2005).
  351. J. H. Sung, M. S. Cho, H. J. Choi, and M.S. Jhon, “Electrorheology of Semiconducting Polymers (vol 10 (7), 1217-29, 2004),” J. Ind. Eng. Chem. 11 (1) (2005).
  352. M.S. Cho, J.W. Kim, H.J. Choi, and M. S. Jhon, “Polyaniline and its Modification for Electroresponsive Materials under Applied Electric Fields,” Polymers for Advanced Technology 16 (4), 352-6 (2005).
  353. C. Xu, P.M. Follmann, L.T. Biegler, and M.S. Jhon, “Numerical Simulation and optimization of a Direct Methanol Fuel Cell,” Computers & Chemical Engineering 29 (8), 1849-60 (2005).
  354. J.S. Choi, J.H. Sung, H.J. Choi, and M.S. Jhon, “Effect of Organoclay Content on Physical Characteristics of Poly(o-ethoxyaniline) Nanocomposites,” Synthetic Metals 153 (1-3), 129-132 (2005).
  355. S. J. Park, S. Y. Park, M. S. Choa, H. J. Choi, M. S. Jhon, “Synthesis and Electrorhelogy of Multi-Walled Carbon Nanotube/Polyaniline Nanopatricles,” Synthetic Metals 152 (1-3), 337-40 (2005).
  356. C.H. Lee, H.B. Kim, S.T. Lim, H.J. Choi, and M.S. Jhon, “Biodegradable Aliphatic Polyester-Poly(epichlorohydrin) Blend/Organoclay Nanocomposites; Synthesis and Rheological Characterization,” J. Mater. Sci. 40 (15), 3981-5 (2005).
  357. J.H. Sung, C.H. Hong, B.J. Park, H.J. Choi, and M.S. Jhon, Comment on “Preparation and Electrorheological Property of Alkaline Earth Metal Compounds Modified Amorphous TiO2 Electrorheological Fluid,” Scripta Materialia 53 (9), 1101-1103 (2005).
  358. Y.-T. Hsia, Q. Guo, S. Izumisawa, and M.S. Jhon, “The Dynamic Behavior of Ultrathin Lubricant Films,” Microsystem Technologies 11 (8-10), 881-6 (2005).
  359. S.J. Park, M.S. Cho, S.T. Lim, H.J. Choi, and M.S. Jhon, “Electrorheology of Multiwalled Carbon Nanotube/Poly(methyl methacrylate) Nanocomposites,” Macromolecular Rapid Commun 26 (19), 1563-6 (2005).
  360. J.H. Sung, J.Y. Shin, H.J. Choi, and M.S. Jhon, “Preparation and Physical Characteristics of Solvent Intercalated Poly(o-ethoxyaniline)/Organoclay Nanocomposites,” J. Mat. Sci. Lett. 40 (18), 4951-3 (2005).
  361. J. H. Sung, D. P. Park, H. J. Choi, and M.S. Jhon, “Phosphorylation of Potato Starch and Its Electrorheological Suspension,” Biomacromolecules 6 (4), 2182-8 (2005)
  362. C. Xu, L.T Biegler, and M.S. Jhon, “Systematic Optimization of a H2 PEMFC Power Generation System with Heat Integration,” AIChE Journal CODEN:69GSKT AN2005:953244
  363. J.H. Sung, H.J. Choi, and M.S. Jhon, “Biocompatible Polysaccharide Based Electro-rheological Suspension,” Electrorheological Fluids and Magnetorheological Suspensions, Proceedings of the International Conference, 9th, Beijing, China 515-20 (2005)
  364. W.T. Kim, Y. Zhou, S.S. Ghai, I. Staroselsky, H. Chen, and M.S. Jhon, “Head-Disk Interface Modeling with Lattice Boltzmann Method,” IEEE Trans. Magnetics 41(10), 3016-8 (2005).
  365. S.T. Lim, H. J. Choi, and M.S. Jhon, “Magnetorheological Characterization of Carbonyl Iron-Organoclay Suspensions,” IEEE Trans. Magn. 41 (10), 3745-7 (2005).
  366. M.S. Cho, H.J. Choi, and M.S. Jhon, “Shear Stress Analysis of a Semiconducting Polymer Based Electrorheological Fluid System,” Polymer 46 (25), 11484-8 (2005).
  367. Q. Guo, S. Izumisawa, H.G. Chen, and M.S. Jhon, “Interfacial Properties of Sub/Mono/Multi-Layer Perfluoropolyether Nanofilms,” Abstracts of Papers, 230th ACS National Meeting, Washington, DC, United States, Aug. 28-Sep. 1, (2005).
  368. Q. Guo, S. Izumisawa, H.G. Chen, and M.S. Jhon, “Interfacial Properties of Sub/Mono/Multi-Layer Perfluoropolyether Nanofilms,” PMSE Preprints 93, 312-3 (2005)
  369. J.H. Sung, W.H. Jang, H.J. Choi, and M.S. Jhon, “Universal Yield Stress Function for Biocompatible Chitosan based-Electrorheological Fluid: Effect of ParticleConcentration,” Polymer 46 (26), 12359-65 (2005).
  370. T.E. Karis and M.S. Jhon, “Thin Liquid Film Deposition,” Encyclopedia of Chemical Processing 3075 – 3087 (2005).
  371. H.J. Choi, J. W. Kim, and M.S. Jhon, “Polymer Clay Nanocomposites,” Encyclopedia of Chemical Processing 2301 – 2312 (2005).
  372. Q. Guo, S. Izumisawa, H.G. Chen, and M.S. Jhon, “Interfacial Properties of sub/mono/multi-layer Perfluoropolyether Nanofilms,” Abstracts of Papers of the American Chemical Society, 230: U3599-U3599 199-PMSE (2005).
  373. J.H. Sung, W.H. Jang, H.J. Choi, M.S. Jhon, “Universal Yield Stress Function for Biocompatible Chitosan Based-Electrorheological Fluid: Effect of Particle Concentration,” Polymer, 46 (26), 12359-12365 (2006).
  374. H.J. Choi, I.S. Lee, J.H. Sung, B.J. Park, and M.S. Jhon, Comment on “Preparation and Electrorheological Property of Rare Earth Modified Amorphous BaxSr1-xTiO3 Gel Electrorheological,” J. Colloid Interface Sci. 295 (1), 291-3 (2006).
  375. Y. Zhou, R. Zhang, I. Staroselsky, H. Chen, W. T. Kim, and M.S. Jhon, “Simulation of Micro- and Nano-scale Flows via the Lattice Boltzmann Method,” Physica A-Statistical Mechanics And Its Applications, 362 (1), 68-77 (2006).
  376. H. Chen, R. Zhang, I. Staroselsky, M. Jhon, “ Recovery of Full Rotational Invariance in Lattice Boltzmann Formulations for High Knudsen Number Flows,” Physica A-Statistical Mechanics And Its Applications, 362 (1), 125-131 (2006).
  377. C.H. Amon, S.S.Ghai, W. T. Kim, and M.S. Jhon, “Modeling of Nanoscale Transport Phenomena: Application to Information Technology,” Physica A-Statistical Mechanics And Its Applications, 362 (1), 36-41 (2006).
  378. R.A. Escobar, S.S. Ghai, M.S. Jhon, and C. H. Amon, “Multi-Length and Time Scale Thermal Transport Using the Lattice Boltzmann Method with Application to Electronics Cooling,” International Journal of Heat and Mass Transfer, 49 (1-2), 97-107 (2006).
  379. F.F. Fang, H.J. Choi, and M.S. Jhon, Comment on "Synthesis and Electrorheological Characterization of Polymer Containing Amino and Carboxy Groups," Colloids and Surfaces A-Physicochemical and Engineering Aspects, 276 (1-3), 232-234 (2006).
  380. W.T. Kim, H.G. Chen, and M.S. Jhon, “Viscoelastic Liquid Bearing Modeling via Lattice Boltzmann Method,” J. Appl. Phys., 99 (8), No. 08N106 (2006).
  381. Q. Guo, P.S. Chung, H.G. Chen, and M.S. Jhon, “Molecular Rheology of Perfluoropolyether Lubricant via Nonequilibrium Molecular Dynamics Simulation,” J. Appl. Phys., 99 (8), No. 08N105 (2006).
  382. S. Ghai, W.T. Kim, C. Amon, and M.S. Jhon, “Transient Thermal Modeling of a Nanoscale Hot spot in Multilayered Film,” J. Appl. Phys., 99 (8), No. 08F906 (2006).
  383. H.G. Chen, L. Li, A. Merzlikine, Y.-T. Hsia, and M.S. Jhon, “Surface Energy and Adhesion of Perfluoropolyether Nanofilms on Carbon Overcoat: The Endgroup and Backbone Chain Effect,” J. Appl. Phys., 99 (8), No. 08N103 (2006).
  384. C.H.Hong, H.J.Choi, and M.S. Jhon, Comment on “Preparation and Enhanced Electrorheological Activity of TiO2 Doped with Chromium Ion,” Chem. Mater., 18(11), 2771-2772 (2006).
  385. C. Xu, L.T. Biegler, and M.S. Jhon, “Systematic Optimization of an H2PEM Fuel Cell Power Generation System with Heat Integration,” AICHE J., 52 (7), 2496-2506 (2006).
  386. S. Ghai, P. Chung, W. T. Kim, C. H. Amon, and M.S. Jhon, “Thermal Modeling of a Multilayered Film via Taylor Series Expansion- and Least Squares-Based-Lattice Boltzmann Method,” IEEE Trans. Magn., 42 (10), 2474-2476 (2006).
  387. Q. Guo, L. Li, Y.-T. Hsia, and M.S. Jhon, “A Spreading Study of Lubricant Films via Optical Surface Analyzer and Molecular Dynamics,” IEEE Trans. Magn., 42 (10), 2528-2530 (2006).
  388. H.G. Chen, Q. Guo, L. Li, Y.-T. Hsia, and M.S. Jhon, “Humidity Effects on the Relaxation of Perfluoropolyether Lubricant Films,” IEEE Trans. Magn., 42 (10), 2531-2533 (2006).
  389. S. Izumisawa and M.S. Jhon, “Stability Model for a Lubricant Film with a Slider,” IEEE Trans. Magn., 42 (10), 2537-2539 (2006).
  390. S. Izumisawa and M.S. Jhon, “Calculation of Disjoining Pressure for Lubricant Films via Molecular Simulation,” IEEE Trans. Magn., 42 (10), 2543-2545 (2006).
  391. Q. Guo and M.S. Jhon, “The Viscoelastic Behavior of Perfluoropolyether Lubricants,” IEEE Trans. Magn., 42 (10), 2540-2542 (2006).
  392. H.J. Choi, Q. Guo, P.S. Chung, M.S. Jhon, “Molecular Rheology of Perfluoropolyether Lubricant via Nonequilibrium Molecular Dynamics Simulation,” IEEE Trans. Magn., 43 (2), 903-905 (2007).
  393. H.J. Choi, C.H. Hong, and M.S. Jhon, “Cole-cole Analysis on Dielectric Spectra of Electrorheological Suspensions,” Int. J. Mod. Phys. B, 21 (28-29), 4974-4980 (2007).
  394. J.L. You, B.J. Park, H.J. Choi, S.B. Choi, and M.S. Jhon, “Preparation and Magnetorheological Characterization of CI/PVB Core/shell Particle Suspended Mr Fluids,” Int. J. Mod. Phys. B, 21 (28-29), 4996-5002 (2007).
  395. H.G. Chen, L. Li, P. Jones, Y.-T. Hsia, and M.S. Jhon, “Lifshitz-van der Waals and Lewis Acid-base Approach for Analyzing Surface Energy of Molecularly Thin Lubricant Films,” IEEE Trans. Magn., 43 (6), 2226-2228 (2007).
  396. H.M. Kim, D. Kim, W.T. Kim, P.S. Chung, and M.S. Jhon “Langmuir Slip Model for Air Bearing Simulation using the Lattice Boltzmann Method,” IEEE Trans. Magn., 43 (6), 2244-2246 (2007).
  397. H.M. Kim and M.S. Jhon, “Numerical Study on Flow Over Oscillating Circular Cylinder Using Curved Moving Boundary Treatment,” KSME Journal B, 31 (11), 895-903 (2007).
  398. H.G. Chen, Q. Guo, and M.S. Jhon, “Effects of molecular structure on the conformation and dynamics of perfluoropolyether nanofilms,” IEEE Transactions on Magnetics, 43 (6), 2247-2249 (2007).
  399. H.G. Chen and M.S. Jhon, “Relationship between Surface Coverage and End Group Functionality of Molecularly Thin Perfluoropolyether Films,” J. Appl. Phys., 103 (7), 07F536 (2008).
  400. P.S. Chung, H.G. Chen, and M.S. Jhon, “Molecular Dynamics Simulation of Binary Mixture Lubricant Films,” J. Appl. Phys., 103 (7), 07F526 (2008).
  401. D. Kim, H.M. Kim, M.S. Jhon, S. Vinay, and J. Buchanan, “A Characteristic Non-reflecting Boundary Treatment in the Lattice Boltzmann Method,” Chinese Physics Letters, 25 (6), 1964-1967 (2008).
  402. P.S. Chung, H.G. Chen, and M.S. Jhon, “Binary Mixture Lubricant Film of Perfluoropolyether Lubricants,” IEEE Trans. Magn., 44 (11), 3706-3709 (2008).
  403. H.G. Chen, P.S. Chung, and M.S. Jhon, “Ultraviolet Bonding of PFPE with Carbon Overcoat: Surface Energy and Spreading,” IEEE. Trans. Magn., 44 (11), 3702-3705, (2008).
  404. P. Jain, L.T. Biegler, and M.S. Jhon, “Parametric Study and Estimation in CFD-based PEM Fuel Cell Models,” AIChE J., 54 (8), 2089-2100 (2008).
  405. P. Jain, L.T. Biegler, and M.S. Jhon, “Optimization of Polymer Electrolyte Fuel Cell Cathodes,” Electrochem Solid-State Lett., 11 (10), B193-B196 (2008).
  406. Q. Guo, P.S. Chung, and M.S. Jhon, “Nano-Mechanics of Perfluoropolyether Films: Compression Versus Tension,” IEEE. Trans. Magn., 44 (11), 3698-3701 (2008).
  407. Q. Guo, P.S. Chung, M.S. Jhon, and H.J. Choi, “Nano-Rheology of Single Unentangled Polymeric Lubricant Films,” Macromolecular Theory and Simulations, 17 (9), 454-459 (2008).
  408. J.-W. Lee and M.S. Jhon, “Recent Trends in Nanotechnology,” KAST Review of Modern Science & Technology, 4, (2008).
  409. D. Kim, W.T. Kim, H.M. Kim, H. Chen, P. Jain, and M.S. Jhon, “A Novel Simulation of Air/Liquid Bearing based on Lattice Boltzmann Method,” J. Appl. Phys., 105, 07B701 (2009).
  410. H. Chen, P.S. Chung, D. Kim, and M.S. Jhon, “Spinning Effects on the Spreading Profiles in PFPE Nanofilms,” IEEE Trans. Mag., 45, 3640-3643 (2009).
  411. P.S. Chung, H. Park, and M.S. Jhon, “ The Static and Dynamic Responses of Binary Mixture Perfluoropolyether Lubricant Films- Molecular Structural Effects,” IEEE Trans. Magn., 45 3644-3647 (2009)  
  412. P.S. Chung and M.S. Jhon, “The Effect of Molecular Structure on the Static and Dynamic Responses of Binary Mixture Perfluoropolyether Lubricant Films,” IEEE Trans. Mag 45 3644-3647 (2009).
  413. H.J. Choi and M.S. Jhon, “Electrorheology of Polymers and Nanocomposites,” Soft Matter, 5 (8), 1562-7 (2009).
  414. F.F. Fang, H.J. Choi, and M.S. Jhon, “Magnetorheology of Soft Magnetic Carbonyl Iron Suspension with Single-walled Carbon Nanotube Additive and its Yield Stress Scaling Function,” Colloids and Surfaces A-Physicochemical and Engineering Aspects, 351, 46, (2009).
  415. D. Kim, P.S. Chung, P. Jain, S.H. Vemuri, and M.S. Jhon, “Multiscale Modeling of Head Disk Interface,” IEEE Trans. Mag. 46 2401-2404(2010).
  416. P.S. Chung and M.S. Jhon, “Molecular Spreading of Pure and Binary Mixture PFPE Nano Films on Carbon-overcoated Disks,” IEEE Trans. Mag. 46 2405-2408 (2010).
  417. M.S. Jhon and H.J. Choi, “Rheological Analysis of Oligomeric Perfluoropolyethers,” Polymer 51 1882-1886 (2010).
  418. P. Jain, L.T. Biegler, and M.S. Jhon “Sensitivity of PEFC Models to Cathode Layer Microstructure,” Journal of the Electrochemical Society 157 B1222-B1229 (2010).
  419. K. Zhang, B.I. Choi, H.J. Choi, and M.S. Jhon, “Comment on 'Fabrication of uniform core-shell structural calcium and titanium precipitation particles and enhanced electrorheological activities',” Nanotechnology 21 378001 (2010).
  420. B.J. Park, J.K. Yeom, W.S. Lim, S.K. Kang, J.W. Bae, G.Y. Yeom, M.S. Jhon, S.H. Shin, K.S. Chang, J.I. Song, Y.T. Lee, and J.H. Jang, “Highly Selective and Low Damage Etching of GaAs/AlGaAs Heterostructure using Cl-2/O-2 Neutral Beam,” Plasma Chemistry and Plasma Processing 30 633-640 (2010).
  421. J.Y. Park, S.K. Kang, M.H. Jeon, M.S. Jhon, and G.Y. Yeom, “Etching of CoFeB Using COONH3 in an Inductively Coupled Plasma Etching System,” Journal of the Electrochemical Society 158 H1-H4 (2011).
  422. S.K. Kang, M.H. Jeon, J.Y. Park, G.Y. Yeom, M.S. Jhon, B.W. Koo, and Y.W. Kim, “Effect of Halogen-Based Neutral Beam on the Etching of Ge2Sb2Te5,” Journal of the Electrochemical Society 158 H769-H771 (2011).
  423. M.S. Jhon, R. Smith, S.H. Vemuri, P.S. Chung, D. Kim, and L.T. Biegler, “Hierarchical Multiscale Modeling Method for Head/Disk Interface,” IEEE Transactions on Magnetics 47 87-93 (2011).
  424. E. Gil, J.B. Park, J.S. Oh, M.S. Jhon, and G.Y. Yeom, “Ion Bombardment during the Deposition of SiOX by AC-Biasing in a Remote-Type Atmospheric Pressure Plasma System,” Journal of the Electrochemical Society 158 G58-G62 (2011).
  425. H.M. Kim, J.H. Kang, and M.S. Jhon, “Hydro-kinetic Approach in Non-Newtonian Lattice Boltzmann Flow Simulation,” Journal of the Korean Physical Society 58 444-447 (2011).
  426. R. Smith, P.S. Chung, J.A. Steckel, M.S. Jhon, and L.T. Biegler, “Force field parameter estimation of functional perfluoropolyether lubricants,” Journal of Applied Physics 109 07B728 (2011).
  427. W.T. Kim, D. Kim, S.H. Vemuri, S.C. Kang, P.S. Chung, and M.S. Jhon, “Multicomponent gas mixture air bearing modeling via lattice Boltzmann method,” Journal of Applied Physics 109 07B759 (2011).
  428. S.K. Kang, M.H. Jeon, J.Y. Park, M.S. Jhon, and G.Y. Yeom, “Etch Damage of Ge2Sb2Te5 for Different Halogen Gases,” Japanese Journal of Applied Physics 50 086501 (2011).
  429. O.J. Yoon, C.Y. Jung, I.Y. Sohn, H.J. Kim, B. Hong, M.S. Jhon, and N.E. Lee, “Nanocomposite nanofibers of poly(D, L-lactic-co-glycolic acid) and graphene oxide nanosheets,” Composites Part A-Applied Science and Manufacturing 42 1978-1984 (2011).
  430. S.H. Vemuri, M.S. Jhon, K. Zhang, and H.J. Choi, “New analysis of yield stress on giant electrorheological fluids,” Colloid and Polymer Science 290 189-192 (2012).
  431. S. Kim, C. Kim, Y.I. Jhon, J.K. Noh, S.H. Vemuri, R. Smith, K.Y. Chung, M.S. Jhon, and B.W. Cho, “Synthesis of layered-layered 0.5Li(2)MnO(3)center dot 0.5LiCoO(2) nanocomposite electrode materials by the mechanochemical process and first principles study,” Journal of Materials Chemistry 22 25418-25426 (2012).
  432. S.H. Vemuri, P.S. Chung, R.L. Smith, N.E. Lee, L.T. Biegler, and M.S. Jhon, “Head-disk interface design in magnetic data storage,” Journal of Applied Physics 111 07B721 (2012).
  433. R.L. Smith, P.S. Chung, S.H. Vemuri, G.Y Yeom, L.T. Biegler, and M.S. Jhon, “Atomistic simulation method in head-disk interface of magnetic data storage systems,” Journal of Applied Physics 111 07B717 (2012).
  434. P.S. Chung, R. Smith, S.H. Vemuri, Y.I. Jhon, K. Tak, I. Moon, L.T. Biegler, and M.S. Jhon, “Multi-scale/multi-physical modeling in head/disk interface of magnetic data storage,” Journal of Applied Physics 111 07B712 (2012).
  435. S. An, M.S. Jhon, C. Han, and J. Maeng, “Thrust Generation of Heaving Foil in Microflow,” AIAA Journal 50 1201-1204 (2012).
  436. D.S. So, C.W. Kim, P.S. Chung, and M.S. Jhon, “Nanotechnology policy in Korea for sustainable growth,” Journal of Nanoparticle Research 14 854 (2012).
  437. Y.I. Jhon, S.E. Zhu, J.H. Ahn, and M.S. Jhon, “The mechanical responses of tilted and non-tilted grain boundaries in graphene,” Carbon 50 3708-3716 (2012).
  438. P.S. Chung, D.S. So, L.T. Biegler, and M.S. Jhon, “Nanotechnology convergence and modeling paradigm of sustainable energy system using polymer electrolyte membrane fuel cell as a benchmark example,” Journal of Nanoparticle Research 14 853 (2012).
  439. S.H. Vemuri, P.S. Chung, R. Smith, G.Y. Yeom, Y.I. Jhon, N.E. Lee, L.T. Biegler, and M.S. Jhon, “Perfluoropolyether Lubricant Interactions With Novel Overcoat via Coarse-Grained Molecular Dynamics,” IEEE Transactions on Magnetics 48 4277-4280 (2012).
  440. R.L. Smith, P.S. Chung, S.H. Vemuri, L.T. Biegler, and M.S. Jhon, “Atomistically Tuning Lubricant Adhesion on Carbon Overcoat Surface,” IEEE Transactions on Magnetics 48 4273-4276 (2012).
  441. H.M. Kim, S.H. Vemuri, P.S. Chung, Y.I. Jhon, N.E. Lee, G.Y. Yeom, and M.S. Jhon, “Temperature Profile in the Presence of Hotspots in Heat Assisted Magnetic Recording,” IEEE Transactions on Magnetics 48 4265-4268 (2012).
  442. J.K. Kim, S.W. Nam, S.I. Cho, M.S. Jhon, K.S. Min, C.K. Kim, H.B. Jung, and G.Y. Yeom, “Study on the oxidation and reduction of tungsten surface for sub-50nm patterning process,” Journal of Vacuum Science & Technology A 30 061305 (2012).
  443. Y.I. Jhon, P.S. Chung, R. Smith, K.S. Min, G.Y. Yeom, and M.S. Jhon, “Grain boundaries orientation effects on tensile mechanics of polycrystalline graphene,” RSC Advances 3 9897-9903 (2013).
  444. C.J. Lee, S. Lee, M.S. Jhon, and J. Shin, “Factors influencing nanotechnology commercialization: an empirical analysis of nanotechnology firms in South Korea,” Journal of Nanoparticle Research 15 1444 (2013).
  445. J.K. Kim, S.I. Cho, N.G. Kim, M.S. Jhon, K.S. Min, C.K. Kim, and G.Y. Yeom, “Study on the Etching Characteristics of Amorphous Carbon Layer in Oxygen Plasma with Carbonyl Sulfide,” Journal of Vacuum Science & Technology A 31 021301 (2013).
  446. J.W. Park, J.T. Lim, J.S. Oh, S.H. Kim, P.P. Viet, M.S. Jhon, and G.Y. Yeom, “Electron-injecting properties of Rb2CO3-doped Alq(3) thin films in organic light-emitting diodes,” Journal of Vacuum Science & Technology A 31 031101 (2013).
  447. V.P. Pham, Y.W. Jo, J.S. Oh, S.M. Kim, J.W. Park, S.H. Kim, M.S. Jhon, and G.Y. Yeom, “Effect of Plasma-Nitric Acid Treatment on the Electrical Conductivity of Flexible Transparent Conductive Films,” Japanese Journal of Applied Physics 52 UNSP075102 (2013).
  448. R.L. Smith, Y.I. Jhon, L.T. Biegler, and M.S. Jhon, “An Atomistic Study of Perfluoropolyether Lubricant Thermal Stability in Heat Assisted Magnetic Recording,” IEEE Transactions on Magnetics 49 3748-3751 (2013).
  449. K. Zhang,Y.D. Liu, M.S. Jhon, and H.J. Choi, “Generalized Yield Stress Equation for Electrorheological Fluids,” Journal of Colloid and Interface Science 409 259-263 (2013).
  450. M.S. Diallo, N.A. Fromer, and M.S. Jhon, “Nanotechnology for sustainable development: retrospective and outlook,” J Nanopart Res 15, 2044 (2013)
  451.  J.T. Lim, J.W. Park, M.S. Jhon, and G.Y. Yeom, “Study of the Electronic Structure of the Interface Between 2-TNATA and MoOx,” Journal of Nanoscience and Nanotechnology 13 8025 (2013)
  452. K.S. Min, S.H. Kang, J.K. Kim, Y.I. Jhon, M.S. Jhon, and G.Y. Yeom, “Atomic Layer Etching of Al2O3 using BCl3/Ar for the Interface Passivation Layer of III-V MOS Devices,” Microelectronic Engineering 110 457 (2013)
  453. Y.I. Jhon, Y.M. Jhon, G.Y. Yeom, and M.S. Jhon, “Orientation dependence of the fracture behavior of grapheme,” Carbon 66, 619 (2014)
  454. M.S. Diallo, N.A. Fromer, and M.S. Jhon, Nanotechnology for Sustainable Development, Springer, Berlin (2014)
  455. H. Chen, S.H. Vemuri, P.S. Chung, and M.S. Jhon, “Buff/Wipe Effects on the Perfluoropolyether Nanoscale Thin Films,” J. Appl. Phys., May  (2014)
  456. P.S. Chung, S.H. Vemuri, and M.S. Jhon, “Molecular rheological Analysis on Binary Blends of Perfluoropolyether Lubricants,” J. Appl. Phys., May  (2014)
  457. S.H. Vemuri, H.M. Kim, P.S. Chung, and M.S. Jhon, “Thermal Modeling of Head Disk Interface system in Heat Assisted Magnetic Recording,” J. Appl. Phys., May  (2014)