Bring an RCA cable to the classroom for your video camera.
Connect the cable to the AV IN/OUT jack on the camcorder.
The location and names will vary due to different camera models, however if you borrowed a camcorder from MediaTech, the jacks are under a light gray flap on the side of the camera. The cable you need is in the case.
Connect the cables to the auxiliary input panel.
RCA cable - connect the yellow cable to the Pb jack (below COMPONENT VIDEO). Connect the white and red cables to the AUDIO LEFT (white) and AUDIO RIGHT (red) jacks respectively.
S-Video cable - connect the cable to the S-VIDEO jack.
Turn the camcorder on.
Depending on your classroom type do one of the following:
Large classrooms and auditoriums (80+ seats), touch Aux (Video) Inputs and then COMPOSITE VIDEO (VCR) - Sound from Composite. Continue to step 6. Note: If using the s-video cable, select S-Video.
Small classrooms (20-80 seats), touch Aux Inputs and then Composite Video. Continue to step 6. Note: If using the s-video cable, select S-Video instead.
Operate the camcorder directly from the device.
Note: In classrooms and auditoriums with a desktop computer a small video window appears on the bottom of the touch screen. If you would like a larger view of the monitor window, touch the Show Desktop Full Screen button.
